Specification
Material: 45 Steel
Color: Red, Gold
Hook Rating: G70
Process: Die-forging, Casting, Spraying, Precision Milling
Gross Weight: 13.5kg/30lbs
Package Size: 40*41*9cm/15.75*16.14*3.54in
Rated Pulling Force: 5400lbs
Test Pulling Force: 10,800lbs
Breaking Tension: 19000lbs
Handle Length: 35.3cm/14in
Chain Length: 6m/20ft
Chain Diameter: 0.78cm/5/16in
Package Included
1*Ratchet Binder
1*Chain
Notes
1. Develop good lifting habits, and plan how to hang, lift and unload before the lifting work starts.
2. Make preparations: determine the weight and center of gravity of the object to be lifted and mark the lifting and weight data. Only after the center of gravity is determined can the hook be hung in the proper position.
3. The crane operator should be informed of the weight of the object to be lifted.
4. The crane hook should be hung vertically above the center of gravity of the object to be lifted.
5. The lifting object is to be lifted in such a way as to avoid damage to the lifting object, damage to the rigging itself, rotation, or dropping. The following conditions need to be observed to ensure safe lifting.
5.1 For single-leg rigging, the lifting point should be vertically above the center of gravity of the object being lifted.
5.2 In the case of double-legged rigging, the lifting point should be located on both sides of the lifting object, with the lifting point above the center of gravity.
5.3 In the case of three-legged and four-legged rigging, the lifting point should be evenly located at the level of the center of gravity of the lifted object and above the center of gravity of the object to be lifted.
6. This product is only suitable for binding and tightening, not for high-altitude hoisting.
7. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order.