Cart 2 india

Specification
Brand : Yctze
BulletPoint : Quantity Of (1) Per Package
BulletPoint1 : 【Application】 The turning center is a tool whose main purpose is to ensure concentric work. The tool was grounded to accurately place the workpiece on the shaft. It has a 60° angle that is suitable for lathes designed for medium speed and medium load environments.
BulletPoint2 : 【General Use】 One piece can be turned on a lathe, sent for hardening and tempering, and then ground in a cylindrical mill between the centers. The center is also used to support longer workpieces where the cutting force excessively distracts the workpiece, reducing the finish and accuracy of the workpiece.
BulletPoint3 : MT2 Live Center, MT2 Live Revolving Milling Center Taper Metal Work Lathe Tool for High Speed Turning, CNC Work
BulletPoint4 : Dust Proof Seal:MT2 live center uses dust proof seal preventing that can cut dust enter into bearing thus prolong service time.
BulletPoint5 : Conical part is made from T10 steel, quenching hardness 60 to 62 HRC, the main body part is made from steel, to use
IncludedComponents : No
ItemName : Yctze MT2 Rotating Live Revolving Centre for Metal Work Milling Lathe Tool
ItemPackageDimensions_Height : 8 centimeters
ItemPackageDimensions_Length : 19 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : live-centers
Manufacturer : Yctze
Material : High Carbon Steel
ModelName : Yctzehn4m1kd2bg
ModelNumber : Yctzehn4m1kd2bg
NumberOfItems : 1
PartNumber : Yctzehn4m1kd2bg
PowerSourceType : ac/dc
ProductDescription : 1. Conical part is made from T10 steel, quenching hardness 60 to 62 HRC, the main body part is made from steel, to use
2. bearing design, using high speed bearing for high accuracy
3. Dust proof seal preventing cutting dust enter into bearing thus prolong service time
4. Designed for lathe in medium speed and medium load environment
5. Well balanced and smooth for effective turning. Ideal to support your work at the tailstock end of your lathe

Spec:
Description:
A lathe center is a tool that has been ground to a point to accurately position a workpiece on an axis. It has an included angle of 60°. The primary use of a center is to ensure concentric work is produced; this allows the workpiece to be transferred between machining operations without any loss of accuracy. A part may be turned in a lathe, sent off for hardening and tempering and then ground between centers in a cylindrical grinder. A center is also used to support longer workpieces where the cutting forces would deflect the work excessively, reducing the finish and accuracy of the workpiece.
Features:
Conical part is made from T10 steel, quenching hardness 60 to 62 HRC, the main body part is made from steel, to use.
bearing design, using high speed bearing for
Dust proof seal preventing cutting dust enter into bearing thus prolong service time.
Designed for lathe in medium speed and medium load environment.
Well balanced and smooth for effective turning. Ideal to support your work at the tailstock end of your lathe.
Specifications:
Type: MT2
Material: Steel
Accuracy: 0.005
. RPM: 5000
Angle: 60°
Load Capacity: 660 pounds
Length: Approx. 145mm / 5.71inch
Outer Diameter: Approx. 41mm / 1.61inch
Weight: Approx. 593g
Package Included:
1 x MT2 Live Center
Note:
1. Please allow 1-3mm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color
ProductSiteLaunchDate : 2024-05-24T05:00:42.715Z
UnitCount : 1
UnspscCode : 53120000