Cart 2 india

Specification
Brand : Respicefinem
BulletPoint1 : Dustproof Prevents Cutting Dust From Entering The Bearing For Longer Service Life
BulletPoint2 : Wood Lathe Accessories, And Efficient Well And Even For Effective Turning. For Supporting Your Work At The Headstock End Of Your Lathe
BulletPoint3 : Dust Proof Prevents Cutting Dust From Entering The Bearing, Prolonging Service Life
BulletPoint4 : Well And For Turning. For Supporting Work At The Tailstock End Of The Lathe
BulletPoint5 : Well And For Effective Turning. To Support Your Work At The Tailstock End Of Your Lathe
IncludedComponents : No
ItemName : Respicefinem Revolving Center Live Centre Mt2 19. 0×8. 0×8. 0 Mt2 Live Revolving Milling Center Taper Metal Work Lathe Tool High Accuracy Live Center
ItemPackageDimensions_Height : 8 centimeters
ItemPackageDimensions_Length : 19 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemTypeKeyword : live-centers
Manufacturer : Respicefinem
ModelName : Respicefinemnbqzopf2rg
ModelNumber : Respicefinemnbqzopf2rg
NumberOfItems : 1
PartNumber : Respicefinemnbqzopf2rg
ProductDescription : Description:
A lathe center is a tool that has been ground to a point to accurately position a workpiece on an axis. It has an included angle of 60°. The primary use of a center is to ensure concentric work is produced; this allows the workpiece to be transferred between machining operations without any loss of accuracy. A part may be turned in a lathe, sent off for hardening and tempering and then ground between centers in a cylindrical grinder. A center is also used to support longer workpieces where the cutting forces would deflect the work excessively, reducing the finish and accuracy of the workpiece.

Features:
Conical part is made from T10 steel, quenching hardness 60 to 62 HRC, the main body part is made from high-quality steel, to use.
High quality bearing design, using high speed bearing for high accuracy.
Dust proof seal preventing cutting dust enter into bearing thus prolong service time.
Designed for lathe in medium speed and medium load environment.
Well balanced and smooth for effective turning. Ideal to support your work at the tailstock end of your lathe.

Specifications:
Type: MT2
Material: Steel
Accuracy: 0.005
Max. RPM: 5000
Angle: 60°
Load Capacity: 660 pounds
Length: Approx. 145mm / 5.71inch
Outer Diameter: Approx. 41mm / 1.61inch
Weight: Approx. 593g

Package Included:
1 x MT2 Live Center

Note:
1. Please allow 1-3mm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
3. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.



ProductSiteLaunchDate : 2024-07-26T03:50:29.770Z
Size : MT1
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 27000000