Cart 2 india

Specification
Brand : YOUTHINK
BulletPoint1 : [Medium Load Capacity] Designed for lathe in medium speed and load environment, supports effective turning
BulletPoint2 : [ Materials] Conical part made from t10 steel with quenching hardness of 61 to 65 hrc, main body from #45 steel
BulletPoint3 : [High Design] bearing with high speed for accuracy, dust proof seal prevents cutting dust from entering bearing for extended service life
BulletPoint4 : [Versatile Usage] for a wide range of turning projects, ensures consistent and results
BulletPoint5 : [Smooth Well balanced design for smooth turning, ideal for tailstock end support in lathe work
IncludedComponents : No
ItemName : High Live Revolving Center, Taper Metal Work Lathe Tool with Bearings and Dust Proof Seal for Medium Speed and Load, Well Balanced, Effective Turning
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 14 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemTypeKeyword : live-centers
Manufacturer : YOUTHINK
ModelName : Youthink8ckdi4xvmz
ModelNumber : YOUTHINK8ckdi4xvmz
NumberOfBoxes : 1
PartNumber : YOUTHINK8ckdi4xvmz
ProductDescription : Spec:

Description:
A lathe center is a tool that has been ground to a point to accurately position a workpiece on an axis. It has an included angle of 60°. The primary use of a center is to ensure concentric work is produced; this allows the workpiece to be transferred between machining operations without any loss of accuracy. A part may be turned in a lathe, sent off for hardening and tempering and then ground between centers in a cylindrical grinder. A center is also used to support longer workpieces where the cutting forces would deflect the work excessively, reducing the finish and accuracy of the workpiece.
Features:
Conical part is made from T10 steel, quenching hardness 61 to 65 HRC, the main body part is made from #45 steel, to use.
bearing design, using high speed bearing for
Dust proof seal preventing cutting dust enter into bearing thus prolong service time.
Designed for lathe in medium speed and medium load environment.
Well balanced and smooth for effective turning. Ideal to support your work at the tailstock end of your lathe.
Specifications:
Type: MT1
Material: Alloy steel
Accuracy: 0.005
. RPM: 5000
Angle: 60°
Load Capacity: 660 pounds
Length: Approx. 116mm / 4.56inch
Outer Diameter: Approx. 39mm / 1.53inch
Weight: Approx. 360g
Package Included:
1 x MT1 Live Center
Note:
1. Please allow 1-3mm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.




ProductSiteLaunchDate : 2024-03-29T04:51:15.901Z
UnitCount : 1
UnspscCode : 53120000