Cart 2 india

Specification
Brand : Taidacent
BulletPoint1 : Automatic water level control: the water level is lower than the low-level induction probe, the water pump is automatically started, the water level rises to a high level, and the water pump is automatically turned off.
BulletPoint2 : Pumping overtime protection: continuous automatic pumping for more than 5 hours, automatically stop the pump. The work indicator flashes quickly, you can press the K2 key to stop, or automatically resume standby by delay.
BulletPoint3 : Manual automatic switching: The controller enters the automatic working mode by default when it is turned on. Press the K1 key to switch the working mode. The red light is on for the automatic mode, and the red light is off for the manual mode.
BulletPoint4 : Non-contact inductive probe: It adopts non-contact capacitive sensing technology and special inductive control chip design. The probe is durable, strong anti-interference ability, sensitive inductive, non-contact with liquid, anti-corrosion, safe and environmental protection without pollution.
Color : dual probe
ExternallyAssignedProductIdentifier1 : 0734831004158
ExternallyAssignedProductIdentifier2 : 734831004158
ItemName : Taidacent Automatic Water Level Controller Automatic Water Pump Controller Either to Fill or Empty a Tank 2 Non Contact Pipeline Water Level Sensor 1 Meter Cable
ItemPackageDimensions_Height : 19.812 centimeters
ItemPackageDimensions_Length : 4.191 centimeters
ItemPackageDimensions_Width : 12.4968 centimeters
ItemTypeKeyword : electronic-component-liquid-level-sensors
Manufacturer : Taida
Material : copper
ProductDescription : Description:
C362 high and low level controller and XKC-Y26-V two liquid level detection heads realize the level control function: when the container level is too low, trigger the low level alarm signal from the low level sensor to trigger the C362 controller to close the relay to start the pump Add liquid level, when the liquid level reaches a certain height, the high liquid level sensor sends a signal to trigger the C362 controller to open the relay to automatically stop the pump, so the cycle works. Thus, the function of automatically controlling the level of the container liquid level is realized, and the container liquid level is kept stable.
Features
1.AC95 ~ 265V wide voltage power supply
2. Relay dry node output, suitable for a variety of load control
3. Diversified control, you can control the pump manually or automatically
4. Installation is simple and convenient. It can be installed by screws or by rails of the electric box.
Parameters
Name: C362 high and low liquid level automatic controller
Input voltage: AC100V-220V, 50 / 60Hz
Working voltage: DC12V
Working current: working current ≤110 mA, static current consumption ≤20mA
Load power: less than 1.6KW (overload or for three-phase pumps need to install AC contactor)
Alarm output: 800W (resistive load) normally open normally closed output
Output method: relay normally open or normally closed or AC110V / 220V two choices of 2 output
Input signal: low-level induction signal input; high-level induction signal input;
Sensor head interface voltage: DC 12V
Working temperature: -10 ~ 75 ℃
Dimensions: 115 * 90 * 40

ProductSiteLaunchDate : 2019-12-21T08:00:00.000Z
Size : 1M
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1