Cart 2 india

Specification
Brand : Respicefinem
BulletPoint : Reed Relays
BulletPoint1 : Intelligent Control:The Controller The To Start When The Liquid Is Too Low, Indicated By The Low Liquid Alarm. It Automatically Stops The When The Liquid Reaches Certain Height, By The High Liquid Sensor. It Be Used To Fill Or Empty
BulletPoint2 : Intelligent Control:When The Liquid Of The Is Too Low, The Low Liquid From The Low Liquid Is To The Controller To Close The Relay To Start The To Liquid When The Liquid Reaches Certain Height, The High Liquid Sends To The Controller To Disconnect The Relay To Automatically Stop The. You Use The Controller To Either To Fill Or Empty. Non Water Controller
BulletPoint3 : Intelligent Control:When The Liquid Of The Container Is Too Low, The Low Liquid Alarm From The Low Liquid Sensor Is To The Controller To Close The Relay To Start The To Add Liquid. When The Liquid Reaches Certain Height, The High Liquid Sensor Sends To The Controller To Disconnect The Relay To Automatically Stop The
BulletPoint4 : Overflow Detection Function:The Default Wiring Is Water Ingress Detection. If You Want The Overflow Detection Function. What You Need To Have Power On The Alarm Output Terminals, The Terminal On The Pump Output And The Terminal On The Alarm Output Need To Be Connected. Then Connected Them With Wire. You Have The Overflow Working Properly Described In The Documentation, The Wire From The Sensor Needs To Be Moved And Connected To The Blue Terminal Together With The Blue Wire
BulletPoint5 : Non Induction Probe And Sensitive Probe That Detects Liquid Without, Ensuring And Environmental
Color : Un 220VAC
ExternallyAssignedProductIdentifier : 7341563677395
ItemName : Respicefinem Non Water Controller 18.0×11.0×5.0 Ac100 To 260V Automatic Water Controller Xkc C352 3P Non Liquid Sensor For Water Strong Wide Voltage Power Supply
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 18 centimeters
ItemPackageDimensions_Width : 11 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-liquid-level-sensors
Manufacturer : Respicefinem
ModelName : Respicefinemopmduzn6ec
ModelNumber : Respicefinemopmduzn6ec
NumberOfItems : 1
PartNumber : Respicefinemopmduzn6ec
ProductDescription :
Item Type: Automatic Water Level Controller
Material: ABS
Model: XKC C352 3P (fully automatic water level control and inlet or overflow detection)
Working Current: Working current 110mA, static current consumption 20mA
Load power:
Resistive loads up to 1.6KW (overload or for three phase loads require an AC contactor)
Inductive loads below 1KW (overload or for three phase loads require additional AC contactors) Inductive loads are loads with inductive coils, such as motors, solenoids, solenoid valves, etc.
Alarm Output: 800W (resistive load) normally open or normally closed output
Output Mode: Normally open or normally closed output
Input Signal: Inductive signal input
Working Temperature: -20 to 105℃
Size: Approx.115 x 90 x 40mm / 4.53 x 3.54 x 1.57in

Package List：
1 x Automatic Water Level Controller
1 x Screwdriver

Note:
If you are not handy and not really very good with electrical stuff, please do not buy this controller, because it needs electrical engineering skills.


ProductSiteLaunchDate : 2024-08-16T05:20:35.252Z
Size : With Probe
UnitCount : 1
UnspscCode : 47131704