Cart 2 india

Specification
Brand : Murphy by Enovation Controls
BulletPoint : Liquid Level Swichgage
BulletPoint1 : Total Length: 115mm / 4.53"; Float Ball Size(Approx): 21 x 22mm / 0.83" x 0.87" (L*D); Thread Dia(Approx): 10mm / 0.39"; Cable Length: 40cm / 15.7"
BulletPoint2 : Max Switching Voltage/Current: 110V DC/0.5A
BulletPoint3 : HOW TO WORK - By using a magnet to sense the reed switch. Float switch is mainly composed of a magnetic spring switch and a float. There are magnetic materials in the float. When the float moves up and down with the water level, it will touch the magnetic spring switch to detect the liquid position
BulletPoint4 : WIDELY APPLICATION - Float switch can be used for water heating equipment such as water dispenser, water heater, humidifier, etc. It also can be used for water tower, drainage pool, water tank, culture pond, etc
BulletPoint5 : PLEASE NOTE - Because the current that the switch can carry is much little(0.5A), you must use a relay or contactor when it is connected by a load, relay or contactor are not included here.
BulletPoint6 : The sensor has been upgraded and waterproofed, so you are not afraid to use it outdoors in rainy days
BulletPoint7 : Low level: turn on the smart plug to turn on the water pump
BulletPoint8 : High level: turn off the smart plug to turn off the water pump.
BulletPoint9 : 1 YEARS WARRANTY:EPTTECH has provided liquid detection solution for over 20 years.1 years gurranty for longterm service.
Color : White
ConnectivityProtocol : X-10
ControlMethod : touch
ExternallyAssignedProductIdentifier1 : 612750509377
ExternallyAssignedProductIdentifier2 : 0612750509377
IncludedComponents : Comes as a Combo Set
ItemName : Murphy by Enovation Controls EL150K1 Liquid Level Swichgage (15700116)
ItemPackageDimensions_Height : 17.3 centimeters
ItemPackageDimensions_Length : 16 centimeters
ItemPackageDimensions_Width : 16.3 centimeters
ItemPackageQuantity : 2
ItemTypeKeyword : electronic-component-liquid-level-sensors
Manufacturer : Murphy by Enovation Controls
Material : Polypropylene
Material1 : Brass
Material2 : Aluminum
MaximumRange : 2.5 meters
ModelNumber : a18050900ux0065
MountingType : Surface Mount
NumberOfItems : 1
OperatingVoltage : 110 volts
OperationMode : Automatic
PartNumber : EL150K1 (15700116)
PowerSourceType : Corded Electric
ProductDescription : The EL150K1 Liquid Level Swichgage instrument is a combination liquid level gauge and low limit switch; the instrument includes:
(1) a chamber with pivotal float,
(2) an indicating dial with pointer,
(3) a low level contact.
When properly installed and maintained, the float operates the pointer which, in turn, both indicates level during normal operation, and closes a switching circuit if the level falls to the low-limit set point.

The primary use of the EL150K1 is for engine cooling systems, surge or expansion tanks, condenser radiator or vapor phase systems, pressurized or atmospheric systems.

The EL150K1 Liquid Level Swichgage instrument can also be used to monitor lube oil, hydraulic fluid or diesel fuel reservoirs and activate alarms and/or shut-down at a predetermined minimum level.

This instrument is built for low pressure systems with a maximum of 25 psi (172 kPa) [1.72 bar].

Features

• Snap-Switch: SPDT rated 10 A @ 125 VAC;
• 0.5 A @ 125 VDC;
• 10 A 30 VDC.
• Die cast aluminum, polyurethane coated case; brass float; polycarbonate lens.
• Wire is (3) 18 AWG x 14 in. (1 mm2 x 356 mm).
• An explosion-proof model is available.

ProductSiteLaunchDate : 2019-05-28T07:00:00.000Z
Size : ZP10010-2-52
Style : Standard
SupplierDeclaredDgHzRegulation : not_applicable
SwitchType : ['Float Switch']
TerminalType : Physical
UnitCount : 1
UpperTemperatureRating : 60 degrees_celsius
Voltage : 110
Wattage : 10 watts