Cart 2 india

Specification
Brand : SKF
BulletPoint : SKF, CR 6904, Shaft Seal, 5/8x1-1/8x1/4", CRWA1, Nitrile
BulletPoint1 : For use as either a large diameter seal (LDS) or small bore seal for power transmission applications
BulletPoint2 : Single steel case for durability
BulletPoint3 : Nitrile rubber for chemical resistance and resistance to wear
BulletPoint4 : Sealing lip for minimizing contaminants
BulletPoint5 : Suitable for less demanding grease-lubricated applications operating at moderate speeds
Color : Blue
ExteriorFinish : Machined
ExternallyAssignedProductIdentifier1 : 085311002509
ExternallyAssignedProductIdentifier2 : 0085311002509
ExternallyAssignedProductIdentifier3 : 00085311002509
FitType : Vehicle Specific
IncludedComponents : Shaft Seal
ItemName : SKF 3060 LDS & Small Bore Seal, R Lip Code, HM14 Style, Inch, 0.313" Shaft Diameter, 0.626" Bore Diameter, 0.156" Width
ItemPackageDimensions_Height : 1.524 centimeters
ItemPackageDimensions_Length : 6.35 centimeters
ItemPackageDimensions_Width : 6.35 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : lip-seals
Manufacturer : SKF USA, Inc.
Material : Alloy Steel
Material1 : Rubber
Material2 : Synthetic Rubber
ModelName : Shaft Seal
ModelNumber : 3060
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : 3060
ProductDescription : Features:
UN oil seal's inner and outer sealing lip are the same height, with a Y-shape cross-section.
PU seal is oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity, and easy to install.
Widely used in the hydraulic cylinder to prevent dust, dirt, sand, and metal debris from entering. Both piston and piston rod can obtain a good sealing effect.
Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure.

Specifications:
Color: Blue
Material: Polyurethane (PU)
Inner Diameter: 25mm
Outer Diameter: 33mm
Max. Outer Diameter: 34.5mm
Width: 5mm
Hardness: 90A
Working Speed: Less than 0.5m/s
Working Pressure: Less than 35Mpa
Working Temperature Range: -35°C to 100°C (-31°F to 212°F)
Cross Section Type: Y Shape

Package Contents:
2 x Lip Seals
ProductSiteLaunchDate : 2010-11-02T20:13:00.906Z
Size : R
Style : HM14
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31410000