Cart 2 india

Specification
Brand : BORDSTRACT
BulletPoint1 : 1. Made of high-quality FKM material, high temperature resistance, compression resistance, adaptability to different temperatures, oxidation resistance, oil resistance, corrosion resistance and atmospheric aging resistance.
BulletPoint2 : 2. The high-quality spring prevents sand, dust, moisture, etc. from entering the bearing from the outside, and the lubricant in the bearing leaks, which has a better sealing effect.
BulletPoint3 : 3. Strictly control the size, the wiring is exquisite, not only the appearance is exquisite, but also a better sealing effect, practical and beautiful.
BulletPoint4 : 4. Applicable to aviation, vehicles, motorcycles, railways, ships, household appliances, engineering equipment and other industries.
BulletPoint5 : 5. It is suitable for rotary motion and reciprocating motion sealing, and is installed in various engines, gearboxes, axles, ships, cylinders, etc.
ItemName : 2 Oil Seals, 65 x 90 x 12mm Fkm High Temperature Pressure Wear Corrosion Resistant Resin with Elasticity for Bearing Shaft Oil Shaft Seals
ItemPackageQuantity : 1
ItemTypeKeyword : lip-seals
Manufacturer : BORDSTRACT
Material1 : Rubber
Material2 : Resin
Material3 : Synthetic Rubber
PartNumber : BORDSTRACTq6t7naegr4
ProductDescription : Specification:

Item Type: Oil Seals
Material: FKM
Type: TC
Sizes: Approx. 65 x 90 x 12mm / 2.6 x 3.5 x 0.5in
Working Temperature: -40℃~125℃
Purpose: Mainly Prevent the Penetration of the Sealed Medium (Gas, Liquid) and Foreign Matter from Entering the Body



Package List:

2 x Oil Seals


Note:

1. Shaft rotation speed Due to design and structure reasons, high‑speed shafts should use high‑speed oil seals, and low‑speed shafts should use low‑speed oil seals. Low‑speed oil seals cannot be used on high‑speed shafts, and can't reverse.2. When the ambient temperature is high, polyacrylate or silicone, fluorine, or silicone fluorine rubber should be used. And should try to reduce the oil temperature in the fuel tank. When the operating temperature is too low, cold‑resistant rubber should be used.3. Oil seals with normal pressure have poor pressure bearing capacity, and the oil seals will be deformed when the pressure is too high. Under conditions of excessive pressure, pressure bearing rings or reinforced pressure oil seals should be used.4. If the eccentricity of the installation oil seals and the shaft are too large when the eccentricity is too large, the sealing performance will become worse, especially when the shaft speed is high. If the eccentricity is too large, an oil seals with a "W"‑shaped section can be used.5. The appearance finish of the shaft directly affects the service life of the oil seals, that is, the higher the finish of the shaft, the longer the service life of the oil seals.6. Note that there should be a certain amount of lubricating oil on the lip of the oil seals.7. Pay special attention to prevent dust from entering the oil seals.

UnspscCode : 31410000