Cart 2 india

Specification
Brand : YOUTHINK
BulletPoint1 : [High and stable movement with cross roller guide rail] The can be adapted to your precise machinery and equipment. Lightweight, the main material is aluminum alloy, suitable for other built-in equipment.
BulletPoint2 : [Easy Installation Method] Mount the on the base using the countersink holes. Rotate the work appearance so that the through holes in the base and the countersink head are concentric. Then secure with screws, repeat on the left side, the can be secured with the four countersink holes.
BulletPoint3 : [Applicable to various high- or medium-load production machines, inspection equipment, accurate positioning and quantitative movement] There are various types of slide tables, such as single axis, dual axis, Z axis, C axis, and R axis, to suit the scenes where a slide table with roller guide is required.
BulletPoint4 : [Ultra-precise micrometer drive system] The rotating allows for precise adjustment of the angle, and the thickness adjustment switch screw can be fine-tuned with a micrometer.
BulletPoint5 : [Various feeding methods such as coarse/fine motion handle/centimeter probe, feed screw, rack and pinion, etc.] The movement value can be managed using a scale.
Color : #411
IncludedComponents : No
ItemName : Slide Table Optical Slide Manual Linear Stage Optical Slide Stage Made of Aluminum Lightweight Manual Moving High Precisely Fixed to The Equipment Micrometer
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 15 centimeters
ItemPackageDimensions_Width : 9 centimeters
ItemTypeKeyword : linear-roller-bearings
Manufacturer : YOUTHINK
ModelName : evhooemf1ix5ger0
ModelNumber : YOUTHINKi563o9mc7a
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : YOUTHINKi563o9mc7a
ProductDescription : Spec:
Item Type: Manual Displacement Platform
Material: Aluminum Alloy
Table Diameter: Approx. 60mm/2.4inch
Travel Mode: RS Rotation R Axis
Stroke: 360 degree coarse adjustment
Fine adjustment: ±5°
Load: 29.4N (3kgf)
Minimum scale: 2 degree
Concentricity: 0.03mm
Table Type: Manual Slide Table
Installation Method:
1. Use the countersunk hole on the base to install the platform.
2. Rotate the work appearance to make the through hole of the screw and the countersunk head of the base concentric.
3. Then fix it with the screw and repeat the left side. After that, the can be used with the four countersunk holes fixed.

How to Use:
1. After loosening the coarse and fine adjustment screws, the workbench can be manually locked with 360 degree coarse and fine adjustment. 2. After replacing the screw, you can use the micrometer to fine-tune the worktable appearance. Be sure to lock it tightly when fine-tuning. Check that the screw is not loose. Once you have adjusted it to the desired position, lock it with the set screw.

Package List:
1 x Manual Displacement Platform

ProductSiteLaunchDate : 2024-09-13T12:56:18.512Z
UnspscCode : 31171500