Cart 2 india

Specification
Brand : KIMISS
BulletPoint : 1pc T8 trapezoidal screw nut housing mounting bracket aluminum for T8 screw nut cnc engraving machine part
BulletPoint1 : The stepper motor drives the accurate diagonal pattern to move the metal slider up and down.
BulletPoint2 : 【2-phase 4-wire stepper motor】 With a miniature 2-phase 4-wire stepping motor, the stroke of the slider is about 22 mM0.9 inches, the diameter of the motor is about 20 mM0.8 inches, and the driving voltage of the motor is 5-9V200-600mA (the higher the voltage, the greater the force Larger, the greater the calorific value).
BulletPoint3 : NEMA09/20 Mini Stepper Motor with Linear Screw Nut Slider 2‑Phase 4‑Wire Slider Stroke 22mm
BulletPoint4 : 【All metal】 The linear screw adopts an alLmetal structure, with fine workmanship, stable performance and high work efficiency, and is an essential part of linear motion.
BulletPoint5 : Can be used in DIY small slideRprojecTmeasurement equipmenTlaser printer.
Color : Silver
IncludedComponents : No
ItemName : NEMA09/20 Stepper Motor Mini Linear Screw Nut Slider Moving Push Motors 20mm Professional Accessories
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 7 centimeters
ItemPackageDimensions_Width : 3 centimeters
ItemTypeKeyword : linear-motion-lead-screws
Manufacturer : KIMISS
ModelName : KIMISSoqix40szfm
ModelNumber : KIMISSoqix40szfm
NumberOfItems : 1
PartNumber : KIMISSoqix40szfm
ProductDescription : 1. Can be used in DIY small slider/project/measurement equipment/ printer.
2. Miniature 2‑phase 4‑wire stepper motor with planetary , planetary reducer adopts all metal structure.
3. The stepper motor drives the accurate diagonal pattern to move the metal slider up and down.
4. The bracket is basically made of metal structure, strong and , has a long service life.
5. The driving voltage is 5‑9v/200‑600mA, the higher the voltage, the greater the force and the greater the heat.

Spec:
Item Type: NEMA09/20 Stepper Motor
Motor Type: 2-phase 4-wire system
Screw Length: Approx. 32mm / 1.3in
Slider Stroke: Approx. 22mm / 0.9in
Motor Diameter: Approx. 20mm / 0.8in
Screw Diameter: Approx. 3mm / 0.1in
Screw Pitch: Approx. 0.5mm / 0.02in (moving 0.025mm in one step, subdivision drive can be used if smaller)
Step Angle: 18°
Phase Resistance: 21Ω
Blue A+Black B+Red B-Yellow A-

Package List:
1 x NEMA09/20 Stepper Motor

Note:
Note that it is a stepper motor, it will not turn when directly connected to the power, and a stepper motor driver board and control board.

ProductSiteLaunchDate : 2024-07-03T16:04:01.858Z
Size : 400mm
UnitCount : 1