Cart 2 india

Specification
AgeRangeDescription : adult
Brand : HUIOP
BulletPoint : rail
BulletPoint1 : ♦ High temperature resistance, the temperature can reach 70℃-100℃.
BulletPoint2 : ♦ Suitable for all kinds of surface materials: aluminum oxide, glass fiber reinforced plastic, steel plate, etc.
BulletPoint3 : ♦ There are 3 TAP types to choose - TAP with Hiwin rail, TAP with Stainless Steel rail, TAP without rail.
BulletPoint4 : ♦ The aluminum alloy frame leveling kit increases the speed and strengthens the structural strength. Accuracy up to 0.4um (0.0004mm).
BulletPoint5 : ♦ The EE-SX398 photoelectric sensor has a service life of 7000000+ probe cycle.
Color : Hgw20cc Kit
ExteriorFinish : Polished
ExternallyAssignedProductIdentifier : 6189481903339
ExternallyAssignedProductIdentifier1 : 0788081699695
ExternallyAssignedProductIdentifier2 : 788081699695
FitType : Vehicle Specific
IncludedComponents : Actuator Link
ItemName : HUIOP Voron Tap Cnc,Voro CNC TAP Aluminum Alloy Tap Lightweight and Anti-shock Structure with Stainless Steel Linear Guide Rail 0.4μm Accuracy Leveling Kit Use EE-SX398 and High Temperature
ItemPackageDimensions_Height : 0.08 inches
ItemPackageDimensions_Length : 12.99 inches
ItemPackageDimensions_Width : 2.36 inches
ItemPackageQuantity : 1
ItemTypeKeyword : linear-motion-guides
Manufacturer : HUIOP
Material : Steel
ModelName : Actuator Link
ModelNumber : MS1290LZ1, MS1290LZA, MS1290LZ, MS12900
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : MMOS8060-2-US0709
ProductDescription : Specification:
Model: VOR CNC Aluminum Alloy TAP
Optional: TAP with Hiwin rail, TAP with Stainless Steel rail, TAP without rail (Optional)
Packing size: 10.5x7x5.5cm/4.1x2.7x2.1in

Note: For customers who purchase the kit without wire rails, if they need to configure their own wire rails, the wire rail specifications must be 34mm length 7H.

Attention:
1) Pay attention to using the linear rail groove tool when installing the linear rail. Do not slide the slider and cause the ball to be lost.
2) When installing by yourself, make sure the installation is aligned, ensure that the slider can slide smoothly and the tap PCB can be triggered.
3) When installing the Stealthburner, the upper holes of the Toolheads should be aligned with the carbon fiber threaded holes to avoid tightening the screws too hard when misaligned, causing the threaded holes to be damaged.

Packing Kit:
1 x Aluminum Alloy Tap Leveling Kit
ProductSiteLaunchDate : 2024-07-11T08:56:06.237Z
Size : with Stainless Steel Linear Guide Rail
SpecificationMet : ISO 9001
Style : Groove
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 25170000
WarrantyDescription : 1 Year