Cart 2 india

Specification
Brand : Zoom Industrial
BulletPoint1 : STROKE LENGTH: 4” (102mm)
BulletPoint2 : VERSATILE: 12v or 24v operation
BulletPoint3 : STRONG: Delivers 330 lbs of force
BulletPoint4 : FAST: 0.315 in/s at 12v; 0.670 in/s at 24v
BulletPoint5 : EXTRAS: Position feedback, Mounting brackets, Weather resistant, Limit switches
Color : Silver
ConnectorType : Screw
ExternallyAssignedProductIdentifier1 : 711583310331
ExternallyAssignedProductIdentifier2 : 0711583310331
ExternallyAssignedProductIdentifier3 : 4250617101140
ExternallyAssignedProductIdentifier4 : 00810086355426
FinishType : Silver
IncludedComponents : Linear Actuator
ItemName : Zoom Industrial Linear Actuator 4" Inch Stroke 330 Pound Max Lift DC 12v/24v Position Feedback Weather Resistant
ItemPackageDimensions_Height : 30.607 centimeters
ItemPackageDimensions_Length : 10.4902 centimeters
ItemPackageDimensions_Width : 18.796 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : linear-motion-actuators
LoadCapacity : 330 pound
Manufacturer : Zoom Industrial
Material : Aluminum, Steel
ModelNumber : Z0400WH
NumberOfItems : 1
NumberOfPositions : 2
PackageLevel : unit
PartNumber : Z0400WH
ProductDescription : A heavy duty actuator with a stroke length of 4". This uses a power supply of 12v-24 and will operate faster with a 24v supply. It will extend or retract 0.315 in/s (8mm/s) at 12v and 0.670 in/s (17mm/s) at 24v. The maximum load (push or pull) is 330 lbs (1500N). This unit has built-in limits switches to cut power automatically at the end of travel. This can be used in harsh environments as it is IP54 rated (weather resistant). This actuator has a position feedback mechanism based on pulses from a hall effect switch. When read by a microcontroller, each pulse represents 0.007046 inches (0.17896mm) or travel. Use of this sensor is completely optional and can be left disconnected. The mounting brackets and pin are included. The wire leads are 3 feet long (1 meter) and have exposed, tinned ends. When positive supply voltage is connect to the Red and Black leads, the actuator will extend. To use the hall position sensor, connect Green to ground, White to supply (5v), and Yellow to a 10k pull-up resistor. The pulse output can be read from the yellow lead.
ProductSiteLaunchDate : 2017-05-04T07:00:00.000Z
SafetyDataSheetUrl : https://cdn.shopify.com/s/files/1/0061/7735/7891/files/Medium_Mini_Actuator_PA-09.pdf?13874
Size : 4" (102mm)
StreetDate : 2018-01-08T00:00:01Z
Style : 4" (100mm)
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
Voltage : 12 volts