Cart 2 india

Specification
AgeRangeDescription : adult
BatteriesIncluded : 1
BatteriesRequired : 1
Brand : FILFEEL
BulletPoint1 : [Wide Power Supply Range] Supports 3, 14v power supply and 2.2, 6v power supply, suitable for various control systems.
BulletPoint2 : [Efficient Power Consumption] Provides 3.3v 100ma power supply to meet the power needs of your devices.
BulletPoint3 : [Independent Motor Control] Each channel can output 5a, top 9a, standby current of only 10ua.
BulletPoint4 : [Easy to Use] Circuit board features printing prompts on the back to indicate the pole for convenient usage.
BulletPoint5 : [Versatile Motor Drive] Two, way h, bridge design allows for driving two dc motors or one 4, wire two, phase stepper motor simultaneously.
Color : #311
ExternallyAssignedProductIdentifier : 7659911158183
Hazmat : 3
IncludedComponents : Valve
ItemName : Motor Drive Module, 5A DC Motor Drive Module, PWM Drive Module, CW CCW Rotation, Two H Bridge Modules, for DC Motor and Stepper Motor with 3, 14V Power Supply and 2.2, 6V
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : linear-motion-actuators
Manufacturer : FILFEEL
ModelName : FILFEELymwvh6dfkb
ModelNumber : FILFEELymwvh6dfkb
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : FILFEELymwvh6dfkb
ProductDescription : [Wide Power Supply Range] Supports 3, 14v power supply and 2.2, 6v power supply, suitable for various control systems.
[Efficient Power Consumption] Provides 3.3v 100ma power supply to meet the power needs of your devices.
[Independent Motor Control] Each channel can output 5a, top 9a, standby current of only 10ua.
[Easy to Use] Circuit board features printing prompts on the back to indicate the pole for convenient usage.
[Versatile Motor Drive] Two, way h, bridge design allows for driving two dc motors or one 4, wire two, phase stepper motor simultaneously.

Spec:

Item Type: Motor Drive Module
Power Supply Module:3~14V
Input Voltage:2.2~6V
Installation Hole Diameter:2mm / 0.08in
Weight: 14 g / 0.49 oz(approx.)



Package List:
1 x Driver Module

Note:
When the motor is commutating, it must wait for the motor to stop first, otherwise the instantaneous current will burn out the module driver chip.
The exposed pins on the back of the board must not be short, circuited, otherwise permanent damage may occur.
Do not the positive and negative poles of the power supply, otherwise it will burn out.There is a printing prompt on the back of the circuit board.


ProductSiteLaunchDate : 2024-10-08T12:46:26.192Z
Size : 24V 700N 15mm s
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1