Cart 2 india

Specification
Brand : Ace Instruments
BulletPoint1 : Features: 1) With self-centering shaft adapter for shaft dia. 8..25.6 mm, square 6...18 mm, min. shaft length 20 mm; 2) With position indication and adjustable mechanical limit stop; 3) Manual override; 4) With housing made of die-cast aluminium and 0.9 m connecting cable.
BulletPoint2 : Spring return function: On power failure or when the operating voltage is switched off, the spring return moves the actuator to its mechanical zero position | Position indication: Output voltage U = DC 0...10 V is generated proportional to the rotary angle | Auxiliary switch: The switching points for auxiliary switches A and B can be set independent of each other in increments of 5° within 5° to 90°.
BulletPoint3 : Positioning Signal: 3-position | Degree of Protection: IP 54 | Auxiliary Switch: 2 | Torque: 18 Nm | Air Damper Area: 3m² | Angular Rotation: 90° | Power Consumption: 7 VA, 5 W
BulletPoint4 : Operating Temperature: -32°C to 55°C | Operating voltage: 24V AC, 24V DC | Positioning Time: Opening with motor: 90 s | Closing With Spring: 15Sec |
BulletPoint5 : Supply Scope: 1 unit of GCA135.1E, Instruction Manual | Applications: HVAC, Industries, Plants, Automobiles
ItemName : Ace Instruments GCA135.1E Rotary Air Damper Actuator AC/DC 24V, 3-Position, 18 Nm, Spring Return 90/15 S, 2 Auxiliary Switches, Potentiometer for HVAC, Air Volume Control,
ItemPackageQuantity : 1
ItemTypeKeyword : linear-motion-actuators
Manufacturer : Siemens
NumberOfItems : 1
PartNumber : Hold Siemens GCA-135.1E-2
ProductDescription : Electronic motor-driven actuators for two-position, three-position, and modulating control, nominal torque 18 Nm, with spring return, self-centering shaft adapter, the mechanically adjustable span between 0...90°, pre-wired with 0.9 m long connection cables. Type- pecific variations with adjustable offset and span for the positioning signal, position ndicator, feedback potentiometer, and adjustable auxiliary switches for supplementary functions.
ProductSiteLaunchDate : 2019-10-18T06:22:42.898Z