Cart 2 india

Specification
AutomotiveFitType : vehicle_specific_fit
Brand : ServoCity
BulletPoint : Genuine Great Dane Trailers Linear Actuator - HENS28061-2
BulletPoint1 : Operating Voltage: 6.0-12 Volts DC/ Operating Speed (12V): 2.63” second at No load/ Operating Speed (12V): 1.85” second at Max load
BulletPoint2 : Static Load: 3,050 lbs./ Duty cycle: 25% (25% on, 75% off)
BulletPoint3 : Motor Type: 3 Pole Ferrite / Gear Ratio: 5:1 Ratio/ Gear Type: 4 Metal Gears
BulletPoint4 : Current Drain (12V): 3A operating No load /CE Certified (CD55011)
BulletPoint5 : Retracted 19.72”/ Extended 27.71”
ConnectorType : Screw
ExteriorFinish : Painted
FitType : Vehicle Specific
IncludedComponents : Linear Actuator
ItemName : 8" 560lb Thrust Super Duty Linear Actuator
ItemPackageDimensions_Height : 7 centimeters
ItemPackageDimensions_Length : 33 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : linear-motion-actuators
Manufacturer : ServoCity
Material : Aluminum
Material1 : Plastic
Material2 : Nylon
ModelName : Linear Actuator
ModelNumber : Pilipanem3va07oekx
MountingType : Wall Mount
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : SDA8-263
ProductDescription : Our super duty linear actuators can be used in place of pneumatics and hydraulics. The super duty linear actuators are driven by high torque brushed DC gearmotors coupled to a ball-screw to create a low friction linear drive. The ball-screw provides efficient linear thrust that can handle loads in both the pushing and pulling orientation. The linear actuators can handle an incredible amount of static load and will hold position even when power is removed. The actuators are equipped with independently adjustable limit switches in the base that will cut power when tripped to prevent over-run. Each actuator has a built-in potentiometer which can be used for positioning feedback if your application requires. The aluminum and steel construction with full metal drive gears ensures tremendous durability and reliability. We offer them in six stroke lengths from 4 inches up to 24 inches. Extension shaft is 1.125” diameter. Mounting holes are 1/2” diameter and bolt up directly to our optional mounting brackets. Note: These systems are extremely powerful and caution must be used during operation.
ProductSiteLaunchDate : 2014-09-24T07:00:00.000Z
Size : 150mm
Style : SFU1605
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31251500
Voltage : 120 volts