Cart 2 india

Specification
Brand : MCWlaser
BulletPoint1 : MCWlaser Laser Tube: 90W laser tube, 80-100W power adjustable. Length 1250mm, outer diameter 80mm. TEM00 mode. Great replacement for your old laser tube. Please make sure the tube fits your machine before ordering it.
BulletPoint2 : High Performance: Use tempered borosilicate glass, premium II-VI lens, gold catalyst coating, ensures stable power and laser beam for optimal performance. 6000-8000 hours lifespan, a cost-effective and reliable solution for demanding applications.
BulletPoint3 : Easy Install & Operation: The positive and negative pole of laser tube have been welded and sealed in advance. The high and low voltage port have been connected by the high voltage connector. It can simplify the installation process and save your time.
BulletPoint4 : NOTE: Each MCWlaser laser tube is tested before shipping and we will provide a safe packaging. It is recommended to use a laser power supply that matches the laser tube.
BulletPoint5 : MCWlase Service: We provide 10 months maintenance period for each laser tube(exclude the man-made damage). If there are any issues with the laser tube, please contact our customer service to replace the defective one(including transportation damage) via Amazon.
Color : Clear
Department : unisex-adult
ExternallyAssignedProductIdentifier1 : 0715834941671
ExternallyAssignedProductIdentifier2 : 715834941671
ItemName : MCWlaser 90W CO2 Laser Tube Glass Laser Tube 80W 90W 100W with Length 1250mm Dia.80mm with Metal Head and Coating Cable Preconnected
ItemPackageDimensions_Height : 158 centimeters
ItemPackageDimensions_Length : 6 centimeters
ItemPackageDimensions_Width : 15 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : line-lasers
Manufacturer : Shanghai Top Nine Industrial Co.,Ltd
Material : Polyester
ModelName : LT-80125
ModelNumber : LT-80125
NumberOfItems : 1
PackageLevel : unit
PartNumber : LT
Pattern : Solid
PocketDescription : Mesh pocket in lid for accessories
ProductDescription : About installation

Laser tube must be placed horizontally.It is made of glass and is fragile. Therefore, be careful when installing and using it.
Determine the positive and negative poles of the laser tube. (metal terminal is negative)
Connect the positive and negative terminals to the wires of the machine.
Connect the cooling water pipe. The inlet water tube is below, and the outlet water tube is above. Must be low in high out.(The 7mm or 8mm inner diameter water hose can be worked with water inlet and outlet of the laser tube.)
Use the laser and test switch on the machine to adjust the optical path, so that the laser point enters from the middle of the entrance hole of the laser head, and then adjust the vertical optical path. (If the battery is weak, try wiping the lens first.)

About Maintenance

Please confirm whether the water circulation is good before each use.
Water temperature should be controlled at 20℃-30℃.
Avoid the dust accumulation nears to the high voltage electrode and keep it dry.
Cooling water should be replaced in time；The higher the power, the more often it is replaced.

ProductSiteLaunchDate : 2023-11-24T07:55:41.523Z
Size : 90W 1250mm
StrapType : Shoulder
Style : Platform
SupplierDeclaredDgHzRegulation : not_applicable
TargetGender : male
WarrantyDescription : 10 Months