Cart 2 india

Specification
Brand : Sundance Spas
BulletPoint : Sensor, Sundance 800, Temp/Hi Limit, Box Ends.
BulletPoint1 : This is a Brand New OEM Furnace Replacement Limit Switch
BulletPoint2 : Top Quality OEM Replacement Part!
BulletPoint3 : L140
BulletPoint4 : Assemble Method:1)The alternate Z joint should be installed at the Z2 position, next to the A motor.2)Using M3x8 SHCS, install the hall effect board into the endstop pod. 3)Using M3x30 SHCS, install the hall effect pod into the right XY joint. 4)Connect the wiring to the hall effect module.5)Do not install the magnets at this time.6)Power on the printer.
BulletPoint5 : Hall Effect Calibration:1)Using a small screwdriver, center the two potentiometers on the board.2)Verify the magnet poles and install.Take a single magnet and slowly move it close to the hall effect board’s Y sensor.3)If the light does not come on with the magnet 5-10mm away, flip the magnet over and try again.4)Once the pole has been identified install the magnet (in exactly the same oriantation!) into the Z joint. 5)Repeat for X axis, magnet is installed into the X carriage over top of a SHCS.
CircuitType : 4-way
Color : White
ConnectivityProtocol : X-10
ConnectorType : Plug In
CurrentRating : 20 microamps
ExternallyAssignedProductIdentifier1 : 0753610480396
ExternallyAssignedProductIdentifier2 : 753610480396
ExternallyAssignedProductIdentifier3 : 00080956950642
IncludedComponents : PCB
InternationalProtectionRating : IP00
ItemName : Sensor, Sundance 800, Temp/Hi Limit, Box Ends
ItemPackageDimensions_Height : 1.65 inches
ItemPackageDimensions_Length : 6.2 inches
ItemPackageDimensions_Width : 1.7 inches
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-limit-switches
LightType : LED
LowerTemperatureRating : -20 degrees_celsius
Manufacturer : Sundance Spas
Material : Copper
MaximumCurrent : 5 amps
ModelName : high limit
ModelNumber : 950-0640
MountingType : Surface Mount
NumberOfItems : 1
NumberOfPositions : 2
OperatingVoltage : 5 volts
OperationMode : ON-OFF
PartNumber : 59-455-1205
ProductDescription : Sensor, Sundance 800, Temp/Hi Limit, Box Ends
ProductSiteLaunchDate : 2020-08-14T08:12:43.000-07:00
SpecificationMet : Oem
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SwitchType : Limit Switch
TerminalType : Screw
UnitCount : 1
UnspscCode : 39120000
UpperTemperatureRating : 50 degrees_celsius
Voltage : 250 volts