Cart 2 india

Specification
Brand : Eaton
BulletPoint : Eaton LS-S11S-RLA General Purpose Limit Switch
BulletPoint1 : Replaces Part Number: SRV230-0900, PP3260
BulletPoint2 : Fits Quadra-Fire Pellet Stove Models: CB1200 - 1997 to 2009, CB1200-C - 2019 to Present, CB1200M-MBK - 2009 to 2019, 1200i Classic Bay Insert.
BulletPoint3 : Snap disc #2 is located on the left side of the appliance behind the access door. There are 2 yellow wires connected to it.
BulletPoint4 : This snap disc will interrupt the thermostat circuit (open the circuit) if the metal under the switch rises above 200°F. This safety switch is usually triggered when an overfire condition occurs or if the convection blower is excessively dirty or should fail to operate.
BulletPoint5 : 200 Degree Fahrenheit High Limit Switch. Normally Closed, Opens when exceeds 200 Degrees. When the temperature falls 40°F below the trigger (160°F) the snap disc automatically resets itself and the appliance will start up again so long as the thermostat is still calling for heat.
BulletPoint6 : 16A @250V Allows high-power loads to operate continuously, and better reliability ensures safe operation of equipment
BulletPoint7 : one year warranty
CareInstructions : self-resetting
CircuitType : 2-way
Color : gray
ConnectivityProtocol : Din
ConnectorType : Screw
ControlMethod : touch
CurrentRating : 4 amps
ExternallyAssignedProductIdentifier1 : 786685392752
ExternallyAssignedProductIdentifier2 : 0786685392752
IncludedComponents : Limit / Interlock Switches
ItemName : Eaton LS-S11S-RLA Miniature DIN Limit Switch, Adjustable Roller Lever Actuator Type, Plastic Screw, SPDT-1NO/1NC Contacts
ItemPackageDimensions_Height : 8.636 centimeters
ItemPackageDimensions_Length : 19.558 centimeters
ItemPackageDimensions_Width : 8.636 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-limit-switches
Manufacturer : Eaton
Material : Plastic
ModelName : High Limit Switch
ModelNumber : SRV230-0900
MountingType : DIN Rail Mount
NumberOfBoxes : 1
NumberOfItems : 1
OperationMode : automatic
PackageLevel : unit
PartNumber : LS-S11S-RLA
ProductDescription : Replaces Part Number: SRV230-0900, PP3260. Fits Quadra-Fire Pellet Stove Models: CB1200 - 1997 to 2009, CB1200-C - 2019 to Present, CB1200M-MBK - 2009 to 2019, 1200i Classic Bay Insert. Snap disc #2 is located on the left side of the appliance behind the access door. There are 2 yellow wires connected to it. This snap disc will interrupt the thermostat circuit (open the circuit) if the metal under the switch rises above 200°F. This safety switch is usually triggered when an overfire condition occurs or if the convection blower is excessively dirty or should fail to operate. 200 Degree Fahrenheit High Limit Switch. Normally Closed, Opens when exceeds 200 Degrees. When the temperature falls 40°F below the trigger (160°F) the snap disc automatically resets itself and the appliance will start up again so long as the thermostat is still calling for heat. 16A @250V Allows high-power loads to operate continuously, and better reliability ensures safe operation of equipment one year warranty
ProductSiteLaunchDate : 2012-10-15T16:05:05.900Z
Size : Normal
SpecificationMet : Din
SupplierDeclaredDgHzRegulation : not_applicable
SwitchType : Kill Switch
TerminalType : Screw
UnitCount : 1
UnspscCode : 39122200