Cart 2 india

Specification
Brand : kitneed
BulletPoint : It is recommended to use a detector card of 800-2000nm for lasers above 1400nm, which is more accurate and sensitive!
BulletPoint1 : Can test metamerism (same color different chromatogram).
BulletPoint2 : This color assessment cabinet can automatically save all records of the contents after power-down.
BulletPoint3 : Fully computer-controlled light switch touch button free.
BulletPoint4 : Permanent record of each separate source name, frequency and switch using times.
BulletPoint5 : Used all the original foreign smt parts, most stable performance. Strict compliance within the frame color and grayscale visual environment of international standards.
Color : One Color
ExternallyAssignedProductIdentifier : 4773174285578
ExternallyAssignedProductIdentifier1 : 0769954290751
ExternallyAssignedProductIdentifier2 : 769954290751
IncludedComponents : Automatic counter
ItemName : Light Booth Color Matching Assessment Cabinet Lab Color Matching Light Box 4 Light Sources Light Box for Textile, Printing and Dyeing Materials, Visual Assessment of Color Fastness
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 19 centimeters
ItemPackageDimensions_Width : 14 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : science-lab-light-sources
Manufacturer : YTBDDHYUE
MeasurementAccuracy : 0.1mm
ModelName : SASKATEvs9hwgbirm
ModelNumber : SASKATEvs9hwgbirm
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : BI-MLLCR-282-US
ProductDescription :

Description

4 Color Assessment Cabinet Box Is Widely Used in Textile, Printing and Dyeing Materials, Visual Assessment of Color Fastness, Color Proofing, Color Identification and Fluorescent Material. for Accurate Proofing Products Color Bias the Samples, Production, and Quality Inspection and Acceptance Criteria in the Same Light Source, so We Can Ensure the Quality of Goods to Meet the Requirements of the Colors, to Improve Quality and Market Competitiveness.

Specification

Outer Dimensions: 71*42*57cm/ 27.95*16.54*22.44in

Net Weight：30kg/ 66.14lbs

Gross Weight：35kg/ 77.2lbs

Material: High Density Board

Package Included

1*Machine

1*Power Line

Notes

1. Turn off the power and press on/off. The power should be turned off if it is not used for a long time.

2. When changing new lamp tube, all sorts of illuminant (tube) have corresponding position to install, cannot the position of lamp tube is reversed. After the replacement of the old lamp tube, the original service time shall be reset to start the timing again). The reset method is to open the replaced lamp tube, insert the screwdriver into the circular hole in the center of CLR, and press the button (the service time of other light tubes will not be reset). Note: Do not use CLR key at will, in order to avoid reset the timing system time by mistake.

3. The light box is equipped with a variety of standard light sources, all installed in the fixed position of the light box, the position can not be reversed.

4. The external power supply of the equipment must have a grounding device to ensure the safe use.

5. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.

ProductSiteLaunchDate : 2024-10-03T11:57:54.307Z
Size : Black
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 60120000