Cart 2 india

Specification
Brand : burko
BulletPoint : WT81B Digital LuxMeter lightMeter illuminometer
BulletPoint1 : High accurancy, 0.1~100,000 Lux.
BulletPoint2 : Long standby time, continuous metering for 26 hours.
BulletPoint3 : 32-bit MCU with high accurancy sensing.
BulletPoint4 : Support multiple charge-ports.
BulletPoint5 : Support reflection metering, incident metering.
Color : White
ExternallyAssignedProductIdentifier1 : 0797442724969
ExternallyAssignedProductIdentifier2 : 797442724969
FinishType : Finish
IncludedComponents : WT81B Digital LuxMeter lightMeter illuminometer X1
ItemName : burko M08 Light Meter Camera Photometer Photography Set-top Reflection Light Meter Hot/Cold Shoe Fixing Camera Light Meter
ItemPackageDimensions_Height : 8 inches
ItemPackageDimensions_Length : 5 inches
ItemPackageDimensions_Width : 3 inches
ItemPackageQuantity : 1
ItemTypeKeyword : photographic-light-meters
Manufacturer : burko
Material : Material
ModelName : CCYLEZ3wosgi24tx
ModelNumber : WT81B
NumberOfItems : 199
PartNumber : E15448USUSJN
PowerSourceType : PowerSource
ProductDescription : /> Aperture F, the range of gear can be set as follows:
F/1.0, 1.2, 1.4, 1.8, 2.0, 2.5, 2.8, 3.2, 3.6, 4.0, 4.5, 5.0, 5.6, 6.3, 6.7, 7.1, 8.0, 9.0, 9.5, 10, 11, 13, 14, 16, 18, 19, 20, 22, 25, 29, 32, 45, 64
Shutter T, the range of gear can be set as follows:
30s, 15, 8, 4, 3, 2, 1.6, 1.3, 1, 1/2, 1/3, 1/4, 1/5, 1/6, 1/8, 1/10, 1/13, 1/15, 1/20, 1/25, 1/30, 1/40, 1/50,1 /60, 1/80, 1/100, 1/125, 1/160, 1/200, 1/250,1 /320, 1/400, 1/500, 1/640, 1/800, 1/1000, 1/1250, 1/1600, 1/2000, 1/4000, 1/8000s
Sensitivity IS0, the range of gear can be set as follows:
6, 8, 10, 12, 16, 20, 25, 32, 40, 50, 64, 80, 100, 125, 160, 200, 250, 320, 400, 500, 640, 800, 1000, 1600, 3200, 6400, 8000
Package size: 180 * 130 * 60mm / 7.1 * 5.1 * 2.4in
Package weight: 160g

Instructions:
1. After receiving the goods, it is recommended to fully c-harge it before using
2. Metering: continuous metering starts when it is turned on, and stops metering when turned off.
3. The operation dial on the right rear side of the machine has three operation modes, press forward, press backward, and press inward (leftward).
4. Selection of priority mode: operate the dial to go in (left) and press to modify the priority mode.
5. When the screen-arrow points to the aperture value, it indicates the aperture priority mode. Press the dial forward or backward to increase or decrease the value. Long press the dial forward or backward to quickly adjust the value.
6. The-arrow on the screen points to the shutter time, indicating the shutter priority mode, the same dial can adjust the value.
7. Long press the dial in (left) for more than 1 second to set the sensitivity. At this time, the screen-arrow points to ISO. Press again to exit the sensitivity setting. When the sensitivity is set, the machine can also measure light continuously.

Packing List:
1 * Light Meter
1 * Power Cable
ProductSiteLaunchDate : 2022-08-26T09:16:18.842Z
SupplierDeclaredDgHzRegulation : not_applicable