Cart 2 india

Specification
Brand : Senhill
BulletPoint1 : Easy to use, a fine-tuned adjustable knob for seam joining or opening, two fine-tuned adjustable knobs for precise leveling.
BulletPoint2 : It can produce clean and straight edges perfectly. With this tool, you can get the job done easily, quickly and elegantly.
BulletPoint3 : Practical tool for seaming & aligning, the seamless splicing tool is designed to joint seams effectively and adjust the height of plates accurately.
BulletPoint4 : This seam joiner is works for any solid surface counter top seams, applicable for ceramic tile, granite, stone, quartz, marble, glass etc. It is also a great tile tool for construction workers, stone fabricators and tile installers to join seams and adjust counter top height.
BulletPoint5 : This seam setter is equipped with two manual vacuum cups, which made of rubber, has a strong and stable suction force with no air leakage. Powerful suction force, can hold the counter top firmly with ease. 153 mm ( 6 inch ) large diameter and 264 lbs maximum vertical suction.
Color : 3t
ExternallyAssignedProductIdentifier1 : 0735022434792
ExternallyAssignedProductIdentifier2 : 735022434792
IncludedComponents : 2 x Seam setters
ItemDisplayWeight : 3 tons
ItemName : Senhill 2 Pack Seamless Seam Setter with 6" Vacuum Suction Cups for Seam Joining and Leveling, Counter top Seam Setter Seam Joiner for Marble Ceramic Tile Glass Granite
ItemPackageDimensions_Height : 53.594 centimeters
ItemPackageDimensions_Length : 18.034 centimeters
ItemPackageDimensions_Width : 26.67 centimeters
ItemPackageQuantity : 1
ItemShape : 3T
ItemTypeKeyword : lifting-clamps
Manufacturer : Senhill
Material : Plastic
Material1 : Nitrile
Material2 : Cast Iron
Material3 : Metal
Material4 : Alloy Steel
ModelName : Seamless Seam Setter with 6" Vacuum Suction Cups
ModelNumber : WFLJQ
NumberOfItems : 2
PackageLevel : unit
PartNumber : 1.1
ProductDescription : Specification:
Suction cup diameter: 6 Inches
Material: stainless steel + rubber+ aluminum knob
Suction of single suction cup :120 kg / 264 lbs

Package included:
2 x Seam setters

How to use the seam setter suction cup?
1. Take off the protective cover.
2. Place the seamless seamer on a non-porous smooth surface.
3. Press the suction pump repeatedly until the red line is invisible to complete the cacuum.
4. To join the seam, turn the side knob counter clockwise until you are satisfied with a seamless appearance.
5. To level the slab, turn the top knobs clockwise until the slab is level. (Usually you only need to use one top knob to level. Use two when there are any expanding needs.)
6. Lift the rubber tab on the edge of the suction cup to release the suction after seam has been completed.

Warm Reminder:
Before use, it is best to loosen the height adjuster knob to avoid it against the surface to cause the suction cup can not complete the vacuum suction.
ProductSiteLaunchDate : 2024-04-20T16:48:00.637Z
Size : Medium
Style : Industrial
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1