Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : 【Holding Electromagnet Parameters】- Voltage: DC 24V; Power: 1.8W; Force: 4kg / 8.8lb; Mounting thread specifications: M3
BulletPoint2 : 【Dood Design】- Overall Size : 25x20mm（D*H）; Lead Length : 250mm / 10 inch
BulletPoint3 : 【ADVANTAGES】- Electricity Lifting Magnet Electromagnet Simple structure, small volume, high adsorption force.copper coil inside, has good temperature stability and insulation, high electricity conductivity
BulletPoint4 : 【NOTED】- The suction contact area of the object to be sucked must be larger than the suction surface of the solenoid electromagnet suction cup,The object absorbed must be clean and The thickness of the object is 5mm best.
BulletPoint5 : 【APPLICATION】- Electricity Lifting Magnet Electromagnet use in vending machines, transport equipment, office facility household appliance, mechanical, etc game machine,Sorting machine,door lock,etc.
ItemName : uxcell DC24V 8KG Lift Holding Electromagnet Sucking Disc Electric Lifting Magnet Solenoid
ItemPackageDimensions_Height : 1.77 inches
ItemPackageDimensions_Length : 4.33 inches
ItemPackageDimensions_Width : 2.36 inches
ItemPackageQuantity : 1
ItemTypeKeyword : lift-magnets
Manufacturer : uxcell
PartNumber : a24070100ux0868
ProductDescription : Feature:

- Electricity lifting magnet

- Powerful and compact

- Smooth and flat surface

- Low consumption and reliable

- Applications: assembly line, sorting machine, mechanical arm, experimental facility, etc

Note:The Force will be decrease due to long time working ,lower voltage and improper Sucked object ect.

It is recommended that the actual force is less than 80% of the sucked force on the name plate.

Specification:

- Voltage: DC 24V

- Mounting thread specifications: M4

- Power: 2.4W

- Force: 8KG / 17.6lb

- Overall Size : 25x20mm（D*H）

- Lead Length : 250mm / 10 inch

Package Includes:

- 1 x Holding Electromagnet

Cautions for the use of electromagnets:

1.The object absorbed must be a good magnetic material.

2.The suction surface of the electromagnet must be smooth and clean.

3.The thickness of the object is 5mm best.

4.The contact surface of the object must be larger than the adsorption surface of the electromagnet.
ProductSiteLaunchDate : 2024-08-15T10:30:46.278Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 24101600