Specification Brand : uxcell BulletPoint1 : 【Holding Electromagnet Parameters】- Voltage: DC 12V; Peak Force :100KG; Holding Force :75KG; Suction Surface Diameter :Φ34 BulletPoint2 : 【Dood Design】- Thread Size :M8; Lead Length : 250mm / 9.84-inch ; Overall Size : 38 x 80mm / 1.5-inch x 3.15-inch (H*D) BulletPoint3 : 【ADVANTAGES】- Eelectric Lifting Magnet Electromagnet Simple structure, small volume, high adsorption force.copper coil inside, has good temperature stability and insulation, high eelectrical conductivity BulletPoint4 : 【NOTED】- The suction contact area of the object to be sucked must be larger than the suction surface of the solenoid electromagnet suction cup,The object absorbed must be clean and The thickness of the object is 5mm best. BulletPoint5 : 【APPLICATION】- Eelectric Lifting Magnet Electromagnet use in vending machines, transport equipment, office facility household appliance, mechanical, etc game machine,Sorting machine,door lock,etc. ItemName : uxcell DC12V 100KG Force Eelectric Lifting Magnet Electromagnet Solenoid Lift Holding 80mm x 38mm ItemPackageDimensions_Height : 12.7 centimeters ItemPackageDimensions_Length : 5.08 centimeters ItemPackageDimensions_Width : 10.16 centimeters ItemPackageQuantity : 1 ItemShape : Round ItemTypeKeyword : lift-magnets Manufacturer : uxcell Material : plastic,metal ModelNumber : a18051900ux0058 NumberOfPieces : 1 PartNumber : a18051900ux0058 ProductDescription : Feature: Eelectric lifting magnet Powerful and compact Smooth and flat surface Low consumption and reliable Applications: assembly line, sorting machine, mechanical arm, experimental facility, etc
Specification: Material: Pure Iron Input Voltage: 12V DC Peak Force :100KG; Holding Force :75KG; Duty-cycle (ED%) : 50%; Eelectric time:Less than 7 minutes ; Suction Surface Diameter :Φ34 Thread Size :M8 Overall Size : 38 x 80mm / 1.5-inch x 3.15-inch (H*D) Lead Length : 250mm / 9.84-inch
Cautions for the use of electromagnets: 1.The object absorbed must be a good magnetic material. 2.The suction surface of the electromagnet must be smooth and clean. 3.The thickness of the object is 5mm best. 4.The contact surface of the object must be larger than the adsorption surface of the electromagnet