Cart 2 india

Specification
AgeRangeDescription : Adult
AutomotiveFitType : universal_fit
AutoPartPosition : rear
Brand : Perterson
BulletPoint1 : Allows 2" diameter clearance / side marker light units (146 series) to be recess mounted.
BulletPoint2 : Required to mount 2" diameter marker light in 146-09 surface mounting adapter
BulletPoint3 : Product Type: Auto Part
BulletPoint4 : Country Of Origin: United States
BulletPoint5 : Included components: automotive-clear-lighting-lenses
Color : Black
CompatibleWithVehicleType : Car
CustomerPackageType : Standard Packaging
Department : Mens
ExteriorFinish : Machined
ExternallyAssignedProductIdentifier1 : 044464919447
ExternallyAssignedProductIdentifier2 : 0044464919447
ExternallyAssignedProductIdentifier3 : 00044464919447
FinishType : Powder coated
FitType : Universal Fit
GpsrSafetyAttestation : 1
IncludedComponents : Lighting & Electrical - Lighting/Lens
IndoorOutdoorUsage : outdoor
ItemDisplayWeight : 0.37 pounds
ItemForm : Sheet
ItemName : 2 inch Side Marker Light Mounting Grommet (146-181) - Single
ItemPackageDimensions_Height : 9.8 centimeters
ItemPackageDimensions_Length : 1 centimeters
ItemPackageDimensions_Width : 8.7 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : automotive-heavy-duty-marker-and-clearance-lights
Manufacturer : Peterson Manufacturing
Material : Metal
ModelName : Grommet
ModelNumber : 146-181
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : 146-181
Pattern : Solid
ProductDescription : Why is headlight protection so valuable ? It has been estimated that on average 1 out of every 6 automobiles will require headlight replacement due to damage from road debris. Replacing headlight components can be an expensive and time consuming process, the average headlamp set costs $450 to replace. Plastic headlights tend to dull and lose their transparency, glass headlights tend to break and fracture as they wear. what tools do I need for install headlight tint? Vinyl Squeegee (Credit Card /w cloth wrap will work) Soft Cloth Towel Spray Bottle with soapy water Hair Dryer or a Heat Gun How to Install Headlight and Tail Light Tint film? 1. Clean the surface of the Headlight or Tail light with soap and water to ensure all debris are removed from the surface of the Tail Light. 2. Carefully remove the Overlay from the sheet and spray the overlay's adhesive side with Soap and Water. The Soap and Water will prevent the Overlay's adhesive from sticking while you apply it the Tail Light. 3. Carefully apply/align the Overlay on the Tail Light and smooth out as much crease as possible by using your fingers. Use the vinyl squeegee to push out all the soapy water on the front face of the Tail Light. The more soapy water you push out the less bubbling there will be. Note: Make sure the crease are evenly distributed on the Overlay, therefore you can easily smooth it out with a heat Gun and Squeegee. 4. Carefully pull and fold the side inward. If necessary, use the hair dryer to soften up the vinyl and squeegee out all the crease. 5. Heat up the excess vinyl (heating up the vinyl will soften it and makes it easy to trim) and trim. Note: Don't worry if you over stretch the vinyl. Any excess vinyl protruding can be easily removed using a knife.
ProductSiteLaunchDate : 2013-08-07T05:22:07.712Z
RecommendedUsesForProduct : Fleet and plant maintenance.
Reusability : Single Use
Size : 2"
SpecificUsesForProduct : Fleet and plant maintenance.
StreetDate : 2018-08-27T00:00:01Z
Style : Custom
SubjectCharacter : Bubble
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Glass,Plastic,Cloth
TargetAudience : Adults who own or drive cars or motorcycles
TargetGender : unisex
Theme : Automobile
UltravioletLightProtection : true
UnitCount : 1
UnspscCode : 25172900
WaterResistanceLevel : water_resistant