Specification Brand : Generic BulletPoint : MAX7219 8-Digit LED Digital Tube Display Control Module 3.3V 5V Microcontroller Serial For ItemName : MAX7219 8-Digit LED Digital Tube Display Control Module 3.3V 5V Microcontroller Serial for ItemTypeKeyword : led-segment-displays Manufacturer : Generic Material : Copper PartNumber : YJX_PMN11890 ProductDescription : MAX7219 8-Digit LED Digital Tube Display Control Module 3.3V 5V Microcontroller Serial For
Introduction 1. The display driver is MAX7219; 2. Onboard two 0.36-inch 4-bit integrated common cathode digital tubes; 3. Support cascading of two or more modules; 4. Has 4 positioning holes with a diameter of 3.6mm; 5. Module power supply voltage DC3.3V or 5V; 6. The module is compatible with 5V/3.3V microcontroller (STC51/AVR/STM32.....) Special Note 1. Do not connect VCC and GND in reverse, so as not to burn the chip. 2.51 The PO port of the microcontroller needs to be connected to a pull-up resistor. If your microcontroller does not have a pull-up resistor, you can connect the data line to other ports. ProductSiteLaunchDate : 2024-04-12T18:38:15.891Z UnspscCode : 43211900