Cart 2 india

Specification
Brand : LIFKICH
BulletPoint1 : Clock display module: the positioning holes in this LED display module 4 bits has 4 screws positioning hole diameter is 2,2mm and the positioning of the module is easy to install with easy to achieve the inter-module combination,4- tube display module
BulletPoint2 : Location hole: 4pcs screw location hole, hole diameter: 2,2mm, the positioning of the module is easy to install, to achieve inter- module combination,common anode display module,common anode display module
BulletPoint3 : Tube clock display: the unit easily connects through the vcc, gnd, and clk pin and displays the digits in red light,drive chip tube clock display
BulletPoint4 : Stable power supply: the voltage of the control interface can be 5v or 3.3v,optoelectronic displays,led display digital tube
BulletPoint5 : LED display module: 0.36 inch 4- tube LED segment display module red common anode,display module common anode
Color : Assorted Color
ExternallyAssignedProductIdentifier : 7640742559614
IncludedComponents : No
ItemName : LIFKICH 2pcs Display Module 4 Seven Segment Display Optoelectronic Displays Tube Clock Display LED Display Digital Tube 4- Tube LED Module 7 Segment Module Resin
ItemPackageDimensions_Height : 0.79 inches
ItemPackageDimensions_Length : 2.36 inches
ItemPackageDimensions_Width : 1.97 inches
ItemPackageQuantity : 1
ItemTypeKeyword : led-segment-displays
Manufacturer : LIFKICH
Material : resin
ModelNumber : N7222062KTQ
NumberOfItems : 1
NumberOfLithiumMetalCells : 1
PartNumber : N7222062KTQ
ProductDescription : Package List
2 x display modules

Characteristics
- Supply voltage: 3.3V-5V DC LED Segment Display Module
- Module current: 30-80mA (When 5V supply power) lighting
- Color: As shown LED digital tube module.
- Control interface: A total of 4 pin (GND, VCC, , CLK), GND to ground, VCC for the power supply, for the data input and output pin, CLK for the clock signal pin daylight light bulbs.
- Size: 400X200X030cm/157X079X012in dimmable.
- Material: Resin board.
- 0.36 inch 4- Tube LED Segment Display Module Red Common Anode Display Module Drive Chip
- The driver IC is , only two signal lines can make MCU control four 8-segment LED Can be used to display decimal, letters and so on tube.
- 4- LED display module with LED brightness adjustable and clock point module.
- Display device is a total of 4 red LED word tube Digital tube 8 grayscale adjustable Display Module Common Anode.

Goods Description
digital LED tube display module This unit is suitable for uses in induction cooker, micro-wave oven and small household electrical appliance.7 segment module The module is a 12 foot with a clock point four common anode tube (0.4 display module 36 in.LED segment display module ) display module for driver ; Only two signal lines can make the MCU bits 8 digital tube
ProductSiteLaunchDate : 2024-10-10T14:25:30.659Z
Size : 4X2CM
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 43211900