Cart 2 india

Specification
Brand : KICHOUSE
BulletPoint1 : Control interface: a total of 4 pin (gnd, vcc, , clk), gnd to ground, vcc for the power supply, for the data input and output pin, clk for the clock signal pin,tube clock display,common anode display module
BulletPoint2 : Display module common anode--0.36 inch 4- tube LED segment display module red common anode,tube clock display
BulletPoint3 : Control port: 4 common anode score points with 0,36 inches led, red highlights,drive chip display module,tube clock display
BulletPoint4 : LED segment display module--it also has a clock point, this allows you to move away from the serial monitor to display values from your sensor by using this simple to use 4 bits 8 segment LED module,tube clock display
BulletPoint5 : Display module drive chip--this unit is suitable for uses in induction cooker, micro-wave oven and small household electrical appliance,tube clock display
Color : Assorted Color
ExternallyAssignedProductIdentifier : 4894905224083
ExternallyAssignedProductIdentifier1 : 0763508303812
ExternallyAssignedProductIdentifier2 : 763508303812
GpsrSafetyAttestation : 1
IncludedComponents : No
ItemName : KICHOUSE 2pcs Display Module Clock LED Display Digital Tube Optoelectronic Displays 4 Seven Segment Display 7 Segment Module 4- Tube LED Module Resin
ItemPackageDimensions_Height : 0.79 inches
ItemPackageDimensions_Length : 2.36 inches
ItemPackageDimensions_Width : 1.97 inches
ItemPackageQuantity : 1
ItemTypeKeyword : led-segment-displays
Manufacturer : KICHOUSE
Material : resin
ModelName : Emoshayogav46i8c2zr7-11
ModelNumber : 00721T44IIP7CA
NumberOfItems : 1
NumberOfLithiumMetalCells : 1
PackageLevel : unit
PartNumber : 00721T44IIP7CA
ProductDescription : Package List
2 x display modules

Features
- Module current: 30-80mA (When 5V supply power) Tube Clock Display
- Size: 400X200X030cm/157X079X012in Common Anode Display Module.
- Material: Resin.
- Color: As shown.
- Supply voltage: 3.3V-5V DC
- The unit easily connects through the VCC, GND, and CLK pin and displays the digits in red Chip Display Module.
- The Positioning holes in this LED Display Module 4 Bits has 4 screws positioning hole diameter is 22mm and the positioning of the module is easy to install with easy to achieve the inter-module combination LED Segment Display Module.
- This unit is suitable for uses in induction cooker, micro-wave oven and small household electrical appliance Display Module Common Anode.
- Thanks to the I2C Bus you can control it using only 2 wires, leaving more pin available on your micro controller to connect other things 4- Tube Display Module.
- It also has a clock point, this allows you to Move away from the Serial Monitor to display values from your sensor by using this simple to use 4 Bits 8 segment LED module Display Module Drive Chip.

Goods Description
Display Module Drive Chip It also has a clock point, this allows you to Move away from the Serial Monitor to display values from your sensor by using this simple to use 4 Bits 8 segment LED module.Common Anode Display Module This module uses driver to drive four standard anode tubes
ProductSiteLaunchDate : 2024-10-25T00:23:05.938Z
Size : 4X2CM
SupplierDeclaredDgHzRegulation : not_applicable
Theme : Number
UnitCount : 1
UnspscCode : 54111600