Cart 2 india

Specification
Brand : DOITOOL
BulletPoint1 : Tube clock display--it also has a clock point, this allows you to move away from the serial monitor to display values from your sensor by using this simple to use 4 bits 8 segment LED module,led segment display module
BulletPoint2 : Location hole: 4pcs screw location hole, hole diameter: 2,2mm, the positioning of the module is easy to install, to achieve inter- module combination,display module drive chip,drive chip display module
BulletPoint3 : Common anode display module--this unit is suitable for uses in induction cooker, micro-wave oven and small household electrical appliance,display module drive chip
BulletPoint4 : Display module common anode--thanks to the you can control it using only 2 wires, leaving more pin available on your to connect other things,display module drive chip
BulletPoint5 : Control interface: a total of 4 pin (gnd, vcc, , clk), gnd to ground, vcc for the power supply, for the data input and output pin, clk for the clock signal pin,drive chip display module,display module drive chip
Color : Assorted Color
ItemName : DOITOOL 4- Led Tube Display Module Common Anode Drive Chip Flexible Digital Display 5v/3.3v
ItemPackageDimensions_Height : 0.79 inches
ItemPackageDimensions_Length : 2.36 inches
ItemPackageDimensions_Width : 1.97 inches
ItemTypeKeyword : led-segment-displays
Manufacturer : DOITOOL
Material : resin
ModelNumber : 9CB4U0106BTANMQHUYL08Z
NumberOfItems : 1
PartNumber : 9CB4U0106BTANMQHUYL08Z
ProductDescription : Package List
2 x display modules

Characteristics
- Module : 30-80mA (When 5V supply power) Common Anode Display Module
- Color: As shown Tube Clock Display.
- Size: 4.00X2.00X0.30cm/1.57X0.79X0.12in.
- Material: Resin.
- Supply voltage: 3.3V-5V DC
- This unit is suitable for uses in induction cooker, micro-wave oven and small household electrical appliance Drive Chip Display Module.
- It also has a clock point, this allows you to Move away from the Serial Monitor to display values from your sensor by using this simple to use 4 Bits 8 segment LED module LED Segment Display Module.
- Thanks to the Bus you can control it using only 2 wires, leaving more pin available on your to connect other things Display Module Common Anode.
- The Positioning holes in this LED Display Module 4 Bits has 4 screws positioning hole diameter is 2.2mm and the positioning of the module is easy to install with easy to achieve the inter-module combination Display Module Drive Chip.
- The unit easily connects through the VCC, GND, and CLK pin and displays the digits in red light.

Goods Information
LED Segment Display Module It also has a clock point, this allows you to Move away from the Serial Monitor to display values from your sensor by using this simple to use 4 Bits 8 segment LED module.Drive Chip Display Module This module uses driver to drive four standard anode tubes
ProductSiteLaunchDate : 2025-04-17T00:37:32.559Z
Size : 4X2CM
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 43211900