Cart 2 india

Specification
Brand : BACAR
BulletPoint1 : Custom Fit: The LCD Display Module is widely used in electronic products such as calculators, electronic clocks, and car dashboards
BulletPoint2 : Premium Quality: The LCD Display Module is made from premium material, with good and stable performance, low generate heat and low power consumption
BulletPoint3 : Good Function: This module is a 12 foot with a clock point four common anode tube (0.36 in.) display module; only two signal lines are needed to enable the MCU to control four 8-bit digital tubes; digital tube 8 gray adjustable
BulletPoint4 : Simple to replace: 4 M2 screws positioning holes for easy installation
BulletPoint5 : Parcel inclued: 1 x 4 Bits TM1637 Digital Tube LED Clock Display Module for ARDUINO Due UNO 2560 R3
Color : Blue
IncludedComponents : No.
ItemName : Bacar 42X24X12mm Digital Tube 4 Bits TM1637 LED Clock Display Board Module for ARDUINO UNO 2560 R3 Due Blue
ItemPackageDimensions_Height : 1 millimeters
ItemPackageDimensions_Length : 1 millimeters
ItemPackageDimensions_Width : 1 millimeters
ItemTypeKeyword : led-segment-displays
Manufacturer : Bacar
ModelName : YedaHcy2dgh7kuwri
ModelNumber : Mavaolyuhvdpkb3q
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : BCUS8DZYJ036_GZ
ProductDescription : Fitment:


Specification:


Features:
The module is a 12 foot with a clock point four common anode tube display module for driver IC TM1637, only two signal lines can make the MCU control 4 8 digital tube.
Module
Display common anode for the four red LED
Digital tube 8 gray adjustable
Level control interface for 5V or 3.3V
4 M2 screws positioning holes for easy installation
Size:42X24X12mm
Interface 4 digital display module:
Control Interface :A total of four pins , GND to ground , VCC is the power supply , DIO of data input and output pin , CLK is the clock signal pin ;
Digital tube:4 common anode score points with 0.36 inches LED, red highlights ;
Positioning holes :4 M2 screws positioning hole diameter is 2.2mm, the positioning of the module is easy to install , to achieve inter- module combination.

Custom Fit: The LCD Display Module is widely used in electronic products such as calculators, electronic clocks, and car dashboards
package:1 x 4 Bits TM1637 Digital Tube LED Clock Display Module for ARDUINO Due UNO 2560 R3
ProductSiteLaunchDate : 2025-01-07T09:33:40.328Z
SupplierDeclaredDgHzRegulation : other
UnspscCode : 43211900
WarrantyDescription : Manufacturer warranty for 90 day