Cart 2 india

Specification
Brand : Agatige
BulletPoint1 : COMPREHENSIVE FUNCTION: LED Display Module LED display module can display numbers, ASCII characters, letters, floating point numbers, negative numbers, etc., brightness can be adjusted
BulletPoint2 : MULTIPLE DEVICE ADDRESSES: LED 7 Segment Display 1 to 247. The default of LED Module is 1. By modifying the 485 address, a maximum of 247 modules can be cascaded(please use RS485 repeaters if over )
BulletPoint3 : EXCELLENT PERFORMANCE: RS485 display module is made with fine workmanship, possess compact appearance and stable performance, can make sure durability and stability
BulletPoint4 : PROTOCOL AND INSTRUCTION: LED digital display board supports for RTU protocol, 03 read command, 06 or 16 write command. Supported Baud Rate: 1200 2400 4800 9600(default) 19200 38400 57600 115200
BulletPoint5 : PRACTICAL LABEL FUNCTION: The RS485 display module supports the electronic label function. After being powered on, you can set the initial display content. Operating Voltage: DC 5~28V
Color : Assorted Color
CompatibleDevices : Raspberry Pi, Raspberry Pi Pico, Arduino, ESP32
CompatibleProcessorTypes : Raspberry Pi (BCM2711, BCM2837, etc.), Raspberry Pi Pico (RP2040), ESP32
GraphicsCardInterface : integrated
IncludedComponents : No
ItemName : Agatige LED 7 Segment Display, LED Display Module, 6 Bit 0.36in DC5~28V Consumer Electronics for PLC Communication
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 7 centimeters
ItemPackageDimensions_Width : 3 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : led-segment-displays
MainPowerConnectorType : 4+4-pin
Manufacturer : Agatige
Material : resin
ModelName : RGB-Matrix-P5-64x32
ModelNumber : Agatigez3cnrdhy0u
NumberOfItems : 1
NumberOfLithiumMetalCells : 1
NumberOfPorts : 2
PartNumber : Agatigez3cnrdhy0u
ProductDescription : PROTOCOL AND INSTRUCTION: LED digital display board supports for RTU protocol, 03 read command, 06 or 16 write command
MULTIPLE DEVICE ADDRESSES: 1 to 247. The default of LED Module is 1. By modifying the 485 address, a maximum of 247 modules can be cascaded(please use RS485 repeaters if over )
COMPREHENSIVE FUNCTION: LED display module can display numbers, ASCII characters, letters, floating point numbers, negative numbers, etc., brightness can be adjusted
PRACTICAL LABEL FUNCTION: The RS485 display module supports the electronic label function. After being powered on, you can set the initial display content
EXCELLENT PERFORMANCE: RS485 display module is made with fine workmanship, possess compact appearance and stable performance, can make sure durability and stability


Item Type: LED Display Module
Operating Voltage: DC 5~28V
Working Current: 4.3~42mA(related to brightness of digital tube)
For RTU protocol, 03 read instruction, 06 or 16 write instruction
Digital Tube Color: Red
Digital Tube Position: 6 Digits 0.36inches
Communication Interface: RS485
Supported Baud Rate: 1200 2400 4800 9600(default) 19200 38400 57600 115200
Parity Check: None, even check, odd check

Package List：
1 x LED Display Module
ProductSiteLaunchDate : 2024-10-10T14:08:07.778Z
Size : 4X2CM
SupplierDeclaredDgHzRegulation : not_applicable
Theme : Number
UnitCount : 1
UnspscCode : 43211900