Cart 2 india

Specification
Brand : Azuocn
BulletPoint1 : 4 M2 screw holes for easy installation.
BulletPoint2 : 4-digit LED display module with LED brightness adjustable and clock point.
BulletPoint3 : Display device is a total of 4 red LED word tube. Digital tube 8 grayscale adjustable.
BulletPoint4 : The driver IC is TM1637, only two signal lines can make MCU control four Digit 8-segment LED. Can be used to display decimal, letters and so on.
BulletPoint5 : Control interface: a total of 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin.
Color : Red
ControllerType : Push Button
ExternallyAssignedProductIdentifier1 : 768470324346
ExternallyAssignedProductIdentifier2 : 0768470324346
ItemName : 6pcs 0.36" 4-Digit Tube LED Segment Display Module Red Common Anode TM1637 Drive Chip Tube Clock Display for Arduino UNO R3
ItemPackageDimensions_Height : 14 centimeters
ItemPackageDimensions_Length : 3.4 centimeters
ItemPackageDimensions_Width : 8.1 centimeters
ItemShape : Tubular(T)
ItemTypeKeyword : led-segment-displays
LightColor : Red
LightType : LED
Manufacturer : Azuocn
NumberOfItems : 6
ProductDescription :

Description:

The module is a 12-pin 4-digit common anode digital tube (0.36 inch) display module with clock dots.

The driver chip is TM1637. Only 2 signal lines are required to enable the single-chip microcomputer to control a 4-digit 8-segment digital tube.

Features:

1. The display device is a 4-digit common anode red-digit digital tube, which can be used to display decimals, letters, etc.

2. The digital tube 8 grayscale adjustabley.

3. The control interface level can be 5V or 3.3V .

4. 4 * M2 screw positioning holes for easy installation.

Control port:

4 common anode score points

GND to ground

VCC for the power supply

DIO for the data input and output pins

CLK for the clock signal pin

Parameter:

Power supply voltage: DC 3.3V-5V

Module current: 30-80MA (when 5V power supply)

Positioning holes: 4 M3 screw positioning holes (hole diameter: 2.2mm)

Package Included:

6* 4-Bit LED Digital Tube Module

ProductSiteLaunchDate : 2021-12-31T15:32:16.328Z
SupplierDeclaredDgHzRegulation : not_applicable
Theme : Number
UnitCount : 6
UnspscCode : 43211900
Voltage : 5 volts
Wattage : 10 watts