uxcell 1W 5V LED Chip Bulb, Light Beads 200lm Brightness High Bead COB LED Chip with Aluminum Plate for Floodlight Spotlight Replacement, 25 Pack(Green Light 520-525K)

Imported from USA | Ships in 10 working days

5% instant discount on non COD

1

₹ 2500/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
Brand : uxcell
Brightness : 200 lumen
BulletPoint1 : Specification: Light Color: Green, Output Power: 1W, Input Voltage: 5VDC, Luminous Flux: 200lm, Color Temperature: 520-525K, Light Color: Green, Outer Diameter: 20mm / 0.79 inch (OD), Material: Aluminum, Plastic, Package Content: 25Pcs x LED Chips.
BulletPoint2 : Advantage: It has the characteristics of low power consumption, high brightness and instant start. The base is made of aluminum, which is easy to dissipate heat and prolong the service life. There is no obvious flickering of the LED lamp beads, and your eyes will not get tired under the light.
BulletPoint3 : Instruction:1. The COB LED light beads must be installed on the aluminum or copper radiator, and the back of the chip needs to be coated with silicone grease to avoid high-temperature burnout. 2. When the working temperature of the light source exceeds 50 degrees, a metal radiator needs to be added to reduce the temperature below 50 degrees, because too high a temperature will affect the use of the lamp beads. 3. The LED light source board cannot connect directly to 220V.
BulletPoint4 : Application: The COB LED lamp beads are widely used in homes, studios, and other scenes to replace and repair floodlights, spotlight bulbs, panel lights, LED downlights, flashlights, track lights, stage lights, etc.
BulletPoint5 : NOTE: The LED light source board cannot connect directly to 220V, it must be powered by a constant current LED drive power supply that is consistent with the parameters of the light board.
Color : 520-525K Green
ColorRenderingIndex : 100
ColorTemperature : 525 kelvin
ConnectivityTechnology : Normal bulb
ControllerType : Push Button
ControlMethod : application
ExternallyAssignedProductIdentifier1 : 738673428066
ExternallyAssignedProductIdentifier2 : 0738673428066
FinishType : Metallic
IncandescentEquivalentWattage : 2 watts
IncludedComponents : Micro LED
IndoorOutdoorUsage : indoor
IsElectric : 1
IsWaterproof : false
ItemName : uxcell 1W 5V LED Chip Bulb, Light Beads 200lm Brightness High Bead COB LED Chip with Aluminum Plate for Floodlight Spotlight Replacement, 25 Pack(Green Light 520-525K)
ItemPackageDimensions_Height : 0.59 inches
ItemPackageDimensions_Length : 5.51 inches
ItemPackageDimensions_Width : 3.94 inches
ItemPackageQuantity : 25
ItemTypeKeyword : electronic-component-led-lamps
LightColor : Green
LightingMethod : LED
LightType : LED
Manufacturer : uxcell
Material : Aluminum
ModelNumber : US-DIODE-16CM-0805-CP-YELLOW-20P
MountingType : Desktop or Tabletop
NumberOfItems : 25
NumberOfLightSources : 1
NumberOfPieces : 25
OccasionType : Party
PartNumber : a24022700ux0270
Pattern : Solid
PowerSourceType : External Power Supply
ProductDescription : The COB LED lamp beads are widely used in homes, studios, and other scenes to replace and repair floodlights, spotlight bulbs, panel lights, LED downlights, flashlights, track lights, stage lights, etc.

Specification
Light Color: Green
Output Power: 1W
Input Voltage: 5VDC
Luminous Flux: 200lm
Color Temperature: 520-525K
Outer Diameter: 20mm / 0.79 inch (OD)
Material: Aluminum, Plastic
Package: 25Pcs x LED Chips

Advantage
It has the characteristics of low power consumption, high brightness and instant start. The base is made of aluminum, which is easy to dissipate heat and prolong the service life. There is no obvious flickering of the LED lamp beads, and your eyes will not get tired under the light

Instruction
1. The COB LED light beads must be installed on the aluminum or copper radiator, and the back of the chip needs to be coated with silicone grease to avoid high-temperature burnout.
2. When the working temperature of the light source exceeds 50 degrees, a metal radiator needs to be added to reduce the temperature below 50 degrees, because too high a temperature will affect the use of the lamp beads.
3. The LED light source board cannot connect directly to 220V, it must be powered by a constant current LED drive power supply that is consistent with the parameters of the light board.

NOTE
Please pay attention to the specifications and parameters of the COB LED lights
ProductSiteLaunchDate : 2024-04-15T10:36:06.617Z
Size : 5mm Flat top
SpecificUsesForProduct : [DIY Projects, Model Making, Science Projects, Lighting]
Style : garden
SupplierDeclaredDgHzRegulation : not_applicable
SwitchType : Push Button
Theme : Party
UnitCount : 25
UnspscCode : 39111500
Voltage : 5 volts_of_direct_current
WarrantyDescription : 3-month refund & 1-year warranty.
Wattage : 1 watts

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
0
4*
0
3*
0
2*
0
1*
0

No reviews found.

Have an opinion on this page? Let's hear it.