Cart 2 india

Specification
Brand : FLILED
Brightness : 1300 lumen
BulletPoint1 : With optocoupler isolation, enhanced anti-interference ability, industrial-grade circuit board, set parameters will always be remembered after power failure.
BulletPoint2 : One‑button emergency stop function (STOP button), with reverse connection , reverse connection does not burn.
BulletPoint3 : Added sleep mode, after enabling, without any within 5 minutes, automatically turn off the display; any key to wake up.
BulletPoint4 : Delay cycle relay module can control equipment within DC 30v 5A or AC 220v 5A.
BulletPoint5 : The relay output is a passive , uncharged output, and has the function of controlling the on and off of a line.
Color : Single Side
ColorTemperature : 6500 kelvin
ControllerType : Push Button
ControlMethod : application
ExternallyAssignedProductIdentifier1 : 764595544430
ExternallyAssignedProductIdentifier2 : 0764595544430
IndoorOutdoorUsage1 : outdoor
IndoorOutdoorUsage2 : indoor
ItemName : FLILED LED BigEasy Sign Tubes, Single Sides, Indoor and Outdoor, Rotatable R17D, Replace F18T12HO and F18T12VHO, 120-277VAC, 10W, 130LM/W, 1300LM, 6500K, SAM UL Retro, 5 Year Warranty
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 13 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemTypeKeyword : electronic-component-led-lamps
LightColor : Daylight White
LightType : LED
Manufacturer : fliled
Material : copper
ModelName : Srliyan2wzu0shgb
ModelNumber : ZL-BETUBE-S18-65K
NumberOfItems : 1
NumberOfLithiumIonCells : 1
PartNumber : ZL-BETUBE-S18-65K
PowerConsumption : 10 watts
ProductDescription : Specification:
Item Type: Relay Module
Material: Copper Clad Laminate
Working Voltage: 6-30V (Support Micro USB 5.0V Power Supply)
Output Capacity: Can Control Equipment Within DC 30v 5A or AC 220v5A
Quiescent Current: 20mA
Working Current: 50m
Service Life: More than 100,000 Times
Working Temperature: -40 to 85℃

How to Use:
How to set parameters
1. First determine the working mode of the relay;
2. According to the working mode of the relay, in the main interface (when the module is powered on, it will flash the current working mode (default P1.1 mode), and then enter the main interface,) Long press the SET button for 2 seconds and then release ”Enter the mode selection interface, and select the mode to be set by short pressing the UP and DOWN buttons (P1.1~P‑4);
3. After selecting the mode to be set (for example, P3.2), short press the SET button to set the corresponding parameters. At this time, the parameters to be set will flash (OP on time, CL off time, LOP cycle times (‑‑ ‑ represents an infinite cycle)), adjust the parameter value through UP and DOWN, support long press (r
ProductSiteLaunchDate : 2021-08-13T00:12:57.192Z
Size : 18"
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 39101600
Wattage : 10 watts