Cart 2 india

Specification
Artist : Artist
Brand : XTevu
BulletPoint : LCR-T9 Multifunction Transistor Meter TFT Graphic Display Tester Diode Capacitance Measure Electronic Industrial Components
BulletPoint1 : The resistance uses 1° metal film resistor, with good performance
BulletPoint2 : Strict quality control and quality assurance, high safety factor, can be used with peace of mind
BulletPoint3 : Using high-quality materials, strong and durable, has a long service life
BulletPoint4 : Can automatically detect the pin layout of detected parts
BulletPoint5 : Measure the current amplification factor of the bipolar transistor and the voltage of the base emitter threshold
Color : Blue
ExternallyAssignedProductIdentifier : 8885998104969
IncludedComponents : No
ItemName : XTevu LCR Meter Transistor Tester MK-8 Inductance Capacitance Resistance Electronic Meter TR LCR ESR Multi Function Transistor Capacitor Tester ESR Tester
ItemPackageDimensions_Height : 6 centimeters
ItemPackageDimensions_Length : 21 centimeters
ItemPackageDimensions_Width : 15 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : lcr-meters
Manufacturer : XTevu
MeasurementAccuracy : 0.1mm
MediaType : ArtworkMedium
ModelName : XTevu2ugryevp7a
ModelNumber : XTevu2ugryevp7a
NumberOfItems : 1
PartNumber : XTevu2ugryevp7a
PowerSourceType : Cable Elã©ctrico
ProductDescription : Item Type: MK-8 Transistor Tester

1. Key operation for automatic shutdown
2. Battery operation is possible because the shutdown current is only about 20mA
3. Automatic detection of NPN and PNP bipolar transistors, N- and P-channel MOSFETs, JFETs, diodes, dual diodes, unidirectional thyristors and bidirectional thyristors.
4. Automatically detect the pin layout of the detected parts.
5. Measure the current amplification factor of the bipolar transistor and the voltage of the base emitter threshold
6. Darlington transistor can be identified by the threshold voltage of high current amplification factor.
7. Measure the gate threshold voltage and gate capacity for MOSFET.
8. Measure and display up to four decimal digit values in the right dimension. All symbols are surrounded by the probe number of the Tester.So potentiometer. If the potentiometer is adjusted to one of its ends, the tester cannot distinguish the middle pin from the end pin.
9. The resistance measurement with resolution is 0.1° and can measure up to 50MΩ
10. Can detect and measure a capacitor. It displays numbers with up to four decimal places in the right dimension. The value can be from 30pF to 100mF. The resolution can get 1pF.
11. For those with a capacity value higher than 2μF equivalent. The serial resistance (ESR) has a resolution of 0.01Ω and displays two significant decimal digits.
12. Up to two diodes are displayed in the correct order and diode symbol. In addition, the forward voltage is also displayed.
13. The LED is detected as a diode; the forward voltage is much higher than the normal voltage. Two-to-one LEDs are also detected as two diodes.
14. If the reverse fault voltage is lower than 4.5 V, the Zener diode can be identified
15. Measure the capacity of a single diode in the opposite direction. If the base is connected and only one collector or emitter is connected, the bipolar transistor can also be analyzed
16.
ProductSiteLaunchDate : 2024-04-18T08:51:20.657Z
TheatricalReleaseDate : 2024-04-17T01:09:56.000-07:00
UnitCount : 1