Specification Brand : Denash BulletPoint1 : Place the pin of the component in the corresponding area, and then toggle the small handle, the detector will automatically test, and the result will be clearly displayed on the backlit TFT screen BulletPoint2 : Simple operation, one‑key for operate, automatic detection and shutdown, you can also press the multi‑function button to close the detector BulletPoint3 : The tester can be used to detect infrared waveforms and Zener diodes BulletPoint4 : Unlike the usual black and white display, this detector will display the color result BulletPoint5 : The product can be widely used to detect NPN and PNP transistors, capacitors, resistors, diodes, transistors, N‑channel and P‑channel MOSFETs, IGBT, JFET, triacs and batteries. IncludedComponents : No ItemName : Transistor Tester, Display Screen Diodes Tester, 0.01mH-20H Diodes for Capacitor Resistors Transistors ItemPackageDimensions_Height : 3 centimeters ItemPackageDimensions_Length : 12 centimeters ItemPackageDimensions_Width : 8 centimeters ItemTypeKeyword : lcr-meters Manufacturer : Denash MeasurementAccuracy : 0.1mm ModelName : Denash1vur9cemnd ModelNumber : Denash1vur9cemnd NumberOfItems : 1 PartNumber : Denash1vur9cemnd ProductDescription : 1. The product can be widely used to detect NPN and PNP transistors, capacitors, resistors, diodes, transistors, N‑channel and P‑channel MOSFETs, IGBT, JFET, triacs and batteries. 2. The tester can be used to detect infrared waveforms and Zener diodes 3. With self‑calibration function, after detection, align the infrared remote control with the IR light, then press the button on the remote control, if the detector successfully decodes, it will display the data code and infrared waveform 4. Simple operation, one‑key for operate, automatic detection and shutdown, you can also press the multi‑function button to close the detector 5. Place the pin of the component in the corresponding area, and then toggle the small handle, the detector will automatically test, and the result will be clearly displayed on the backlit TFT screen 6. Unlike the usual black and white display, this detector will display the color result