Cart 2 india

Specification
Brand : FTVOGUE
BulletPoint1 : Scope of Application: This tester can achieve automatic detection of NPN and PNP bipolar transistors, N channel and P channel MOSFETs, JFETs, diodes (including double diodes), N and P IGBTs, resistors (including potentiometers), inductors, capacitors, thyristors, three terminal Triac and battery (0.1‑4.5V).
BulletPoint2 : Easy Use: This tester can automatically read accurate data, which is easy to use.
BulletPoint3 : Graphical Display: 12864LCD graphic display is adopted, the display of the tester is intuitive and the information content is large.
BulletPoint4 : Rechargeable: There is a built in lithium ion battery, you can use it for a long time on a single .
BulletPoint5 : Easy Carrying: Comes with small size and lightweight, you can easily take this tester with you to help with your work.
IncludedComponents : No
ItemName : Multifunctional Tester Set ABS Colorful Display TFT Backlight Transistor Tester
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 11 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemTypeKeyword : lcr-meters
Manufacturer : FTVOGUE
MeasurementAccuracy : 0.1mm
ModelName : Ftvogueky3v6r1w8e
ModelNumber : FTVOGUEky3v6r1w8e
NumberOfItems : 1
PartNumber : FTVOGUEky3v6r1w8e
ProductDescription : Specification:
Item Type: Multifunctional Tester
Material: ABS
Battery: Lithium Battery 800mAh (Built in Battery)
Uses: This tester can measure various resistances, capacitances, inductances, diodes, triodes, thyristors, MOS field effect transistors; can determine the type of device, polarity of pins, output HFE, valve voltage, junction capacitance of field effect transistors.
Basic Parameters:
Display: 160 x 128 TFT Display
Note:
1. One key to start and test, automatically identify the device type, automatically switch the range, and automatically shut down after the test.
2. The standby current is as small as 20na, and the standby power is negligible for long standby time, and the battery can be used for power supply.
3. Automatically detect PNP and NPN type bipolar transistors, N, P channel MOSFET, JFET, diode, double diode, thyristor thyristor (thyristor), triode, resistor, capacitor, capacitor ESR value.
4. Automatically detect the pin layout and give the label according to the actual sequence.
5. Measure the current amplification factor β of the bipolar transistor, the threshold voltage of the emitter junction, and the ICE leakage current.
6. Darlington transistors can be identified by high threshold voltage and high current amplification factor.
7. For bipolar transistors, MOSFET diode detection and forward voltage drop Uf.
8. Measure the threshold voltage Vt and gate capacitance C of the MOSFET.
9. Detect and determine the forward voltage of the emitter transistor and the magnification and base of the transistor and MOSFET diode.

Package List:
1 xMultifunctional Tester
2 x Test Module
1 x Test Cable
3 x Accessory
1 x Instruction Manual
1 x Plastic Box
1 x Data Cable
ProductSiteLaunchDate : 2025-04-22T17:18:43.154Z
UnspscCode : 41113600