Cart 2 india

Specification
Brand : Generic
BulletPoint1 : Measure up to two diodes at a time, showing their positive and negative, on-voltage.
BulletPoint2 : Output one square , multiple frequency options are available, the highest output frequency is 2MHz.
BulletPoint3 : Detect power triode and FET built-in diodes.
BulletPoint4 : When testing a single diode, the reverse junction capacitance of the PN junction is tested at the same time. The PN junction capacitance of the transistor can also be tested. At this time, only the base and emitter of the transistor, or the base and collector can be placed at the same time.
BulletPoint5 : The display unit uses a 160x128 color display, full-screen characters 8x20, 16-bit color depth, graphic display elements symbols.
Color : White
ExternallyAssignedProductIdentifier : 7552280621213
IncludedComponents : No
ItemName : Diode Tester, Transistor Tester, PWM Generator Capacitor PNP
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 12 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemTypeKeyword : lcr-meters
Manufacturer : Generic
MeasurementAccuracy : 0.1mm
ModelName : Generic2ycin8hkrv
ModelNumber : Generic2ycin8hkrv
NumberOfItems : 1
PartNumber : Generic2ycin8hkrv
PowerSourceType : Ac
ProductDescription : 1. The use of single chip microcomputer ATMEAG328P DIP-28 with IC block.
2. The display unit uses a 160x128 color display, full-screen characters 8x20, 16-bit color depth, graphic display elements symbols.
3. Rotating coding switch control, one-button measurement, automatic shutdown.
4. Powered by 9V laminated battery (not included), can also use the power adapter, the whole current of about 30mA, about 20nA current after shutdown.
5. Automatic detection of NPN and PNP transistors, FET, diodes, dual diode, thyristor, silicon controlled rectifier, automatic identification of the transistor pin out.
6. Test NPN and PNP triode common emitter current amplification factor, base-emitter threshold voltage, collector-emitter leakage current at turn-off.
7. Identification for Darlington transistors through triode base-emitter threshold voltage and high current amplification factor.
8. Detect power triode and FET built-in diodes.
9. Test FET gate-source turn-on threshold voltage, drain-source on-, gate-source capacitance.
10. It can measure up to 2 resistors at a time, so the adjustable resistors of the three feet can also be measured. If the adjustable resistor is adjusted to the end point, only one value can be measured.
11. The is measured at a maximum resolution of 0.01Ω. Can measure up to 50MΩ.
12. Capacitor measurement range from 25pF to 100mF with 1pF resolution.
13. For capacitors larger than 90nF, the equivalent series () is measured at the same time. The resolution of the equivalent series is up to 0.01Ω.
14. For capacitors larger than 5000pF, the voltage drop rate after charging is also displayed. This value can reflect the quality factor (Q value) of the capacitor.
15. Measure up to two diodes at a time, showing their positive and negative, on-voltage.
16. The LED is also shown as a graphical symbol of the diode, which has a much higher turn-on voltage than a
ProductSiteLaunchDate : 2024-10-18T04:19:18.665Z
Size : 83 x 83 x 30 mm
Style : Benchtop
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 41113600