Cart 2 india

Specification
Brand : KIMISS
BulletPoint1 : Multi-function Transistor Tester: This smart tool can automatically recognize NPN and PNP bipolar transistors, N-channel and P-channel MOSFETs, diodes, thyristors, and other electronic components. With it, you can easily identify a variety of semiconductors, transistors and resistors.
BulletPoint2 : Simple One-Key Operation: BSIDE ESR02 Pro Digital Transistor Tester is equipped with a one-key operation design, making it easy even for beginners. Just start the device and press a button to test the components, the readings will be intelligibly displayed on the LCD screen.
BulletPoint3 : Clear LCD Display with Backlight: This Digital Transistor Tester features a large LCD display with backlight functionality, allowing you to read the test results easily even in dimly lit conditions. It ensures high accuracy and readability.
BulletPoint4 : Advanced Detection Capability: Equipped with a powerful detection system capable of determining transistor emitter forward bias voltage, MOSFET diode, and amplification factor reference, the device provides you with detailed component analysis.
BulletPoint5 : Versatile SMD Component Meter: Whether you're an electronics enthusiast, a professional technician, or a DIY lover, this Inductance Meter with automatic detection functionality helps to simplify processes and ensures optimal performance in diagnosing the SMD chip components.
IncludedComponents : No
ItemName : BSIDE ESR02 Pro Digital Transistor TesterMultifunction Inductance Meter with LCD Display and Automatic Component Detection for SMD Chip Components
ItemPackageDimensions_Height : 6 centimeters
ItemPackageDimensions_Length : 18 centimeters
ItemPackageDimensions_Width : 11 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : lcr-meters
Manufacturer : KIMISS
MeasurementAccuracy : 0.1mm
ModelName : KIMISSg4qp9a25kr
ModelNumber : KIMISSg4qp9a25kr
NumberOfItems : 1
PartNumber : KIMISSg4qp9a25kr
ProductDescription : Specification:
Brand: BSIDE
Model: ESR02 Pro
Resistor: 0Ω~50Ω, Resolution: 0.01 ohm
Capacity: 25pF~100mF, Resolution: 1pF
Inductance: 0.01mH~20H, Resolution: 0.01mH
Capacitor Resolution: 0.01Ω
Battery: 1pcs x 9V 6LR61 Battery (NOT included)
Color: black
Size: Approx. 14*8*4.5cm/5.5*3.1*1.8inch
Weight: Approx.214g/7.5oz

Using Instruction:
Push POWER / TEST to power on and start a test, multiple measurements can be repeated by this key, auto power off 20 seconds after measurement.
Provide three kinds of socket, each socket pin 1, pin 2 and pin 3 are connected.
The placement of the device does not require the order of instruction, and the screen displays the component function of each pin after measuring.
There is a table typical value of electrolytic capacitor at the back, it is for guiding only, these are typical value for standard grade electrolytic capacitor at room temperature.
Calibration:
Short the test pin 1, 2, 3 together and push POWER / TEST button, then the screen prompts to enter calibration, push the button again within 2 seconds to confirm. Few seconds latter the screen prompts to release pin 1, 2, 3, release them and wait for calibration finish.
Package List:
1 x Transistor Tester
1 x User Manual

Note:
Before testing the capacitor, be sure to discharge it, otherwise it may damage the internal circuit.
If using DC supply, please choose DC 9V~12V adapter. (including 9V and 12V)
Can be powered by a 9V 6LR61 battery (NOT included), when the battery power is under 6V, please replace a new one.
How to Use
Package List
Note
ProductSiteLaunchDate : 2024-07-11T14:27:57.830Z
Size : Red Display