Cart 2 india

Specification
AdaptiveSync : freesync
AspectRatio : 1:1
Brand : waveshare
BulletPoint1 : This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
BulletPoint2 : No backlight, keeps displaying last content for a long time even when power down
BulletPoint3 : Ultra low power consumption, basically power is only required for refreshing
BulletPoint4 : Onboard voltage translator, compatible with 3.3V/5V MCUs; SPI interface, for connecting with controller boards like for Raspberry Pi/Arduino/Nucleo, etc.
BulletPoint5 : Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Ardui/STM32)
Color : 1.54 inch E-Ink Module 200 x 200
ColorGamut : 99
CompatibleDevices : Raspberry Pi, Arduino, Nucleo, Jetson Nano
ConnectivityTechnology : wired
ConnectivityTechnology1 : USB
ConnectivityTechnology2 : HDMI
ControlMethod : touch
ExternallyAssignedProductIdentifier1 : 615311268058
ExternallyAssignedProductIdentifier2 : 0615311268058
GraphicsCardInterface : integrated
GraphicsDescription : Dedicated
HardwareInterface1 : displayport
HardwareInterface2 : hdmi
HardwareInterface3 : usb3.2_gen_1
HardwareInterface4 : 3_5_mm_audio
HasColorScreen : 1
Hazmat : auto-grounding
HumanInterfaceInput : buttons
ImageAspectRatio : 21:9
ImageBrightness : 400
ImageContrastRatio : 3000:1
IncludedComponents : 1.54inch e-Paper Module, XH2.54 20cm 8Pin
IncludedComponents1 : Monitor Panel
IncludedComponents2 : Stand Riser
IncludedComponents3 : Stand Base
IncludedComponents4 : Power Cable
IncludedComponents5 : DisplayPort to DisplayPort 1.4 Cable
IncludedComponents6 : HDMI 2.0 Cable
IncludedComponents7 : SuperSpeed USB 5 Gbps (USB 3.2 Gen1) Upstream Cable
IncludedComponents8 : Quick Setup Guide
IncludedComponents9 : Safety, Environmental and Regulatory Information
IsElectric : 1
ItemName : 1.54 Inch E-Paper Screen Display Module Resolution 200x200 3.3v E-Ink Electronic Display with Embedded Controller SPI Interface Support Partial Refresh for Raspberry Pi/Arduino/Nucleo/Jetson Nano
ItemPackageDimensions_Height : 7 centimeters
ItemPackageDimensions_Length : 2.4 centimeters
ItemPackageDimensions_Width : 5.3 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : lcd-graphic-displays
Manufacturer : Waveshare
Material : copper
MaxHorizontalResolution : 3440 pixels
MaxVerticalResolution : 1440 pixels
ModelName : Dell 34 Curved Gaming Monitor - S3422DWG
ModelNumber : 2.13inch E-Ink HAT 250x122
MountingType : Wall Mount
NativeResolution : 200 X 200
NumberOfBoxes : 1
NumberOfDisplaysSupported : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : 1.54inch E-Ink Module 200x200
PersonalComputerDesignType : barebone
PictureQualityEnhancementTechnology : AMD FreeSync Premium
PixelPitch : 109
PowerConsumption : 26.4 milliwatts
ProductDescription :

PLEASE NOTE

1. Don't forget to remove the original protector film on the screen to present more vivid image, or the screen looks curled.

2. This monitor has an exposed back with No case.

3. The default langue of this monitor is English, if not, you can set it to English as this procedure: MENU---SETUP---Language---English.

4. Please choose 5V/3A power adapter instead of 5V/2A to power your Raspberry Pi if you use our 3 pin gift cable to power this monitor via the Raspberry Pi. The monitor may display abnormally when the power is insufficient. Please note that don’t power the monitor again if you use the 3 pin gift cable, or the monitor will burn out.

5. Package includes two kinds of screws, the M3*8 black ones are for stands installation, and the M2.5*6 silver ones for your Raspberry Pi installation. Please don’t mistake them.

6. For those devices without HDMI port such as Raspberry Pi4, please use the right adapter to connect.

7. This touchscreen monitor is mainly designed for Raspberry Pi. So the bootup screen displays a "Raspberry Pi" Logo.

Superior SPECS

Resolution: 1024x600

Contrast: 700:1

Aspect Ratio: 16:9/4:3

Average Brightness: 300cd/M2

Gamut Parameter: NTSC 50%

Refresh Rate: 60 Hz

Backlight Type: Highlight LED

Monitor Dimensions: 4.8"x6.5"x0.5"(HxWxD)

Monitor Weight: 0.5lb

Lebula 7inch USB Monitor is Widely Compatible with:

Raspberry Pi 4B, 3B/B+/A+, 2B, 1A+/B+, Retro Pi

Supports Raspbian, Ubuntu Mate, NOOBS with RaspberryPi

Supports Windows 7/8/10, Mac OS, TV

Supports XBOX, NS, PS4

Supports Kodi

 

ProductSiteLaunchDate : 2017-06-02T07:00:00.000Z
RealAngleOfView : 178 degrees
RefreshRate : 144 hertz
Resolution : 200 X 200
ResponseTime : 2 milliseconds
ScreenSurfaceDescription : Matte
SeriesNumber : 34
Size : 1.54inch E-Ink Module 200x200
SpecificationMet : Viewing angle >170°
SpecificUsesForProduct : Everyday Use
SpecificUsesForProduct1 : Photo Editing
SpecificUsesForProduct2 : Education
SpecificUsesForProduct3 : Gaming
SpecificUsesForProduct4 : Business
SpecificUsesForProduct5 : Programming
SpecificUsesForProduct6 : Video Editing
StreetDate : 2021-05-30T00:00:01Z
Style : Minimalist
SupplierDeclaredDgHzRegulation : not_applicable
TotalHdmiPorts : 2
TotalUsb20Ports : 2
TotalUsb30Ports : 4
TotalUsbPorts : 4
TotalVideoOutPorts : 3
UnspscCode : 43211500
VideoOutput : HDMI
ViewingAngle : 178 degrees
Voltage : 100 volts_of_alternating_current
WarrantyDescription : 3-Year Advanced Exchange Service & Premium Panel Exchange
WarrantyType : 3 Years Manufacturer Warranty
WirelessNetworkTechnology : wifi