Cart 2 india

Specification
Brand : Ferwooh
BulletPoint1 : DC 5V HD44780 1602 LCD Display Module Blue Blacklight.
BulletPoint2 : 1602 LCD Display Module, Built -in industry standard HD44780 LCD controller; Viewing area size: 64.5mm x 14.5mm; External dimensions: 80.0x35.0x11.0mm.
BulletPoint3 : 2 lines x 16 characters can be displayed;SMC1602A (16 * 2) Analog portline wiring.
BulletPoint4 : LCD display module with blue backlight; Wide view angle and high contrast.
BulletPoint5 : Generally used: Network devices such as copies, faxes, laser printers, industrial test equipment, routers and storage devices.
Color : default
ItemName : Ferwooh 2PCS DC 5V 1602 LCD Display Module 16×2 Character LCD Screen Module LCM Blue Blacklight HD44780 Controller
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : lcd-character-modules
Manufacturer : Ferwooh
Material : Copper
ModelName : Generic2rvu9m45q1
ModelNumber : Generic2rvu9m45q1
NumberOfBoxes : 1
NumberOfItems : 2
PartNumber : 270001
ProductDescription : Features:
Display: 16x2 characters
LED backlight: Blue External dimensions: 80.0x35.0x11.0mm
Range: 64.5mm x14.5mm
Controller IC: SPLC780D or equal
LCD display module with blue backlight
Wide view angle and high contrast
Built -in industry standard HD44780 LCD controller
LCM type: Character
2 lines x 16 characters can be displayed
Generally used: Network devices such as copies, faxes, laser printers, industrial test equipment, routers and storage devices.
SMC1602A (16 * 2) Analog portline wiring

Connection diagram:

LCM ----- 51 LCM ----- 51 LCM ------ 51
Db0 ----- p1.0 db4 ----- p1.4 rw ------- p2.0
Db1 ----- p1.1 db5 ----- p1.5 RS ------ p2.1
Db2 ----- p1.2 db6 ----- p1.6 e ------- p2.2
DB3 ----- p1.3 db7 ----- P1.7 Connect the 1K resistance from VLCD to GND

PIN Explanation:
Step 1: VSS is the ground power source
Pin 2: VDD connected to 5V positive power supply
Step 3: V0 is the contrast adjustment end of the LCD display
Step 4: RS is for register selection, select data register for high level, and select instruction register for low level.
Step 5: R/W is the reading and writing signal line, which is used for reading operations during high battery life and writing operations during low battery life. When RS and RW are both low level, instructions or display addresses can be written. When RS is low level, RW is high level, busy signals can be read. When RS is high level, RW is low level, data can be written.
Pin 6: The E end is the enable end. When the E end jumps from a high level to a low level, the LCD module executes the command.
Pins 7-14: D0-D7 are 8-bit bidirectional data cables.
Pin 15: Backlight power positive pole
Pin 16: Negative pole of backlight power supply
Package content:
2 X DC 5V 1602 LCD display module LCD Screen Module Blue Blacklight HD44780 Controller
ProductSiteLaunchDate : 2024-03-27T08:20:46.756Z
Size : With touch at least 9 IO drivers
UnspscCode : 43211900
WarrantyDescription : Manufacturer warranty for 90 day