Cart 2 india

Specification
Brand : Satco
BulletPoint1 : Center Opening in saddle: 3/8"
BulletPoint2 : This Nickel lamp harp has a Silver tone, is 7” high, and fits lampshades around 8”-9” tall.
BulletPoint3 : Heavy Duty Construction
BulletPoint4 : Saddle can be removed if wishing to keep your existing saddle
BulletPoint5 : Accepts standard 1/4-27 threaded finials (Finial not included)
Color : Silver
ExternallyAssignedProductIdentifier1 : 045923707001
ExternallyAssignedProductIdentifier2 : 0045923707001
FinishType : Polished
GpsrSafetyAttestation : 1
IncludedComponents : SPIDER
IncludedComponents1 : Fabric cover x 2
IncludedComponents2 : Top ring x 2
IncludedComponents3 : Bottom ring x 2
IsAssemblyRequired : 1
ItemName : 7 Inch Heavy Duty Harp Fitter For Lamp Shades Polished Nickel
ItemPackageDimensions_Height : 2.032 centimeters
ItemPackageDimensions_Length : 35.56 centimeters
ItemPackageDimensions_Width : 17.526 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : lampshades
Manufacturer : Satco
Material : Metal
Material1 : ‎Polyvinyl Chloride (PVC)
Material2 : Linen
Material3 : Metal
ModelName : LAMPSHADE
ModelNumber : LAMPSHADE-03
MountingType : Freestanding
NumberOfItems : 1
NumberOfLithiumMetalCells : 1
NumberOfPieces : 1
PartNumber : S70-700
Pattern : Solid
ProductDescription : What is a harp? Harps are what we call those flexible U-shaped metal wires that connect the lamp base to the lamp shade. Most harps have a small metal cap on each end to prevent the harp from slipping off the socket. A harp gives the added bonus of protecting the bulb from accidental breakage. Often people buy a new harp when fitting a new lampshade. If you buy a shade EXACTLY like your old one, you should not need a new harp. Luckily, most harps are interchangeable, so if your new shade does not fit perfectly at first, switching the harp is easy and can usually get you a perfect fit. If you need a different size harp, first remove the finial and you should see a number stamped into the top plate of your harp. This number indicates the height (in inches) of your current harp. Now you have a reference point and you can measure how much higher or shorter your new harp should be. Another way to raise the shade is to get a “shade-riser”, which we carry in 1” or 2” models. How to find the perfect harp size every time? - You will know that you have the perfect harp height when you look across the bottom of the shade and the socket is almost visible. If your harp is too tall, you will see the socket. If the harp is too short, you will have to reach up too far to turn on the light. The LampsUSA Harp Fitting Formula is Harp Height = [Shade Height] - [Drop] - [1/2"] So, Take the total shade height and subtract the "drop" (to find the “drop”, measure from the top of the shade down to the center of the spider. Most shades have drops of ½” – 1”. But some tall shades have drops of 3-4” so since this will really affect your harp size, be sure to measure this before ordering.) Then Subtract ½” (to make sure the socket is not exposed.)
ProductSiteLaunchDate : 2014-04-25T18:00:13.000-05:00
RecommendedUsesForProduct : Floor Lamp Shade, Table Lamp Shade, Chandelier Shade
RecommendedUsesForProduct1 : Ceiling Shade
RecommendedUsesForProduct2 : Pendant Lamp Shade
RecommendedUsesForProduct3 : Wall Lamp Shade
RecommendedUsesForProduct4 : Hanging Shade
RecommendedUsesForProduct5 : Floor Lamp Shade
RecommendedUsesForProduct6 : Table Lamp Shade
RecommendedUsesForProduct7 : Chandelier Shade
RecommendedUsesForProduct8 : DIY draw Shade
Size : 30.00X30.00X23.00CM
StreetDate : 2023-12-31T08:00:00.000Z
Style : Traditional
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 39111800