Cart 2 india

Specification
Brand : Marhynchus
BulletPoint1 : [Multi-size Use] Fits a wide range of sizes from a4 to 3r, for laminating photos, menus, documents, certificates, and drawings, catering to diverse office needs.
BulletPoint2 : [Effortless Film Removal] Equipped with abs toggle key for easy film removal during lamination, ensuring a secure and convenient experience.
BulletPoint3 : [Versatile Lamination] Suitable for both cold and hot lamination, operating quietly for a peaceful work environment, ideal for various laminating projects.
BulletPoint4 : [Rapid Processing] Features a lamination speed of 320mm per minute, processing materials quickly with a 230mm (a4) laminating width and ≤0.5mm thickness.
BulletPoint5 : [Fast & Powerful] Utilizes quartz heating wire for quick and efficient lamination, reducing time costs significantly with a preheat time of just 1 to 3 minutes.
ItemName : Electric Photo Laminator, ABS Toggle Key for Film Removal, Fast Quartz Heating Wire Laminating Machine A4 to 3R Size (US Plug AC110-120V)
ItemPackageDimensions_Height : 9 centimeters
ItemPackageDimensions_Length : 35 centimeters
ItemPackageDimensions_Width : 13 centimeters
ItemTypeKeyword : laminators
Manufacturer : Marhynchus
ModelNumber : Marhynchuskxr02ivmut-12
PartNumber : Marhynchuskxr02ivmut-12
ProductDescription : Spec:

Item Type: Photo Laminator
Product Model: FNL009
Power: 300W
Film Removal Method: ABS Toggle Key
Laminating Size: A4-3R
Heating Method: Quartz Heating Wire
Laminating Width: Approx. 230mm / 9.1in (A4)
Laminating Thickness: ≤0.5mm
Preheating Time: 1-3min
Temperature Range: 115℃-145℃
Laminating Speed: 320mm/min
Noise: ≤55db
Size: Approx. 315 x 108 x 75mm / 12.4 x 4.3 x 3in



Package List:
1 x Laminator
1 x User Manual


Note:
Non stick paper, foggy white pieces
1. Not complete the preheating, the temperature is not enough, wait for the laminating machine to complete the preheating (green light) and then use
2. Thickness gear is not correct, select a higher gear, warm up and then laminate
No working or heating of the laminating machine
1. The power supply is not fit, please check the power supply specification before powering on the laminating machine.
2. The switch is not set to on hot mode, set the switch to on hot mode.
Bubbles, wrinkles, bent photos
1. Incorrect thickness gear, select a lower gear, cool down and and then laminate.
2. The rollers of the laminator are not flat and there are debris, check the rollers and clean them.
3. Laminating objects are not placed on the level, there are debris, laminating before removing debris, put the objects on the level and then laminatied.
What should do if there is a paper jam?
1. Not correctly feed the paper, the roller on the foreign body, switch off and hold down the ABS key for the film, clean the roller
Smoke over the laminating machine
1. Normal vulcanization of the new machine imagined, a normal phenomenon of the new machine, more than a few times will disappear.
2. Power supply voltage does not match (burnt flavor), please check the power supply specifications before
ProductSiteLaunchDate : 2024-11-09T17:05:06.458Z
Size : US Plug AC110-120V
UnspscCode : 44102801