Cart 2 india

Specification
Brand : INTBUYING
BulletPoint1 : This automatic pneumatic laminator features 63in/1600mm soft rubber rollers, with roller Dia of 5.12in (130mm), Max. 10m/min laminating speed and Max 1.38in laminating thickness.
BulletPoint2 : This laminator need to connect to 8L air compressor, with pneumatic lifting control handle enables manual adjustment of the rubber roller to move up and down. The air compressor not included.
BulletPoint3 : Featuring with microcomputer control panel, users can freely select laminating functions, cold Laminating or hot Laminating, adjustable temperature Max 60℃, manual mode and auto mode, forward/backward of roller running, adjust speed,ect. Set parameters as needed and monitor laminating status clearly.
BulletPoint4 : Designed with film support rods to handle both lined and liner-free films. The large-diameter aluminum alloy stripping rod reduces vibration during laminating.
BulletPoint5 : Four cutting devices can be flexibly installed on the supporting rod to efficiently remove white edges from prints and precisely cut them into sections as required. Lamination and cutting processes can be performed at the same time to enhance efficiency.
BulletPoint6 : The emergency switch can be used to immediately stop the machine in emergency, can be easily pressed and rotated, effectively protect the personal safety and provides safety guarantee for operators.
BulletPoint7 : Widely applicable for laminating wedding photos, posters, advertising images, book covers, documents, calligraphy, paintings, invitations and more. Ideal for use in advertising, printing, photography and packaging industries.
Color : Grey
ExternallyAssignedProductIdentifier1 : 0767421842236
ExternallyAssignedProductIdentifier2 : 767421842236
ExternallyAssignedProductIdentifier3 : 00814790022315
ExternallyAssignedProductIdentifier4 : 0798804349554
Hazmat : auto-grounding
ItemName : 63In Full - Auto Pneumatic Low Temperature Cold Laminating Machine Auto/Manual Mode, 1.38In Laminating Thickness, Large Format Roll Laminator for Commercial Office
ItemPackageDimensions_Height : 31.5 inches
ItemPackageDimensions_Length : 86.61 inches
ItemPackageDimensions_Width : 31.89 inches
ItemPackageQuantity : 1
ItemTypeKeyword : laminating-machines
Manufacturer : INTBUYING
Material : polyester
ModelNumber : PFML151
NumberOfItems : 2
NumberOfRollers : 1
PaperSize : Tabloid
PartNumber : 120076
ProductDescription : Parameters:
Product Name: 63-inch Pneumatic Low-Temperature Cold Laminator
Max. Laminating Width: 63In (1600mm)
Max. Laminating Thickness: 1.38In (35mm)
Max. Laminating Speed: 10m/min
Temperature Adjusting Range: Room temperature to 60C/140F
Roller Lifting Way: Double Cylinder Linkage Lifting System
Roller Heating Type: Within the Infrared Heating
Preheating Time: 10-15min
Diameter of upper and lower Rollers: 5.12in (130mm)
Material of Rollers: Silicone material of Rubber Roller
Motor power: 120W
Heating Rod Power: 1500W
Rated input voltage: 110V
Net weight: 293Lb
Whole Size: about 78.84x24.41x53.15in(200x62x135cm)
Four Universal Casters with two Brake
Foot Switch and Emergency Stop Button
Note: Air compressor NOT included, the air compressor should prepared by yourself.
This laminator should be used with 8L air compressor

Package included: 1set 110V 63In Full-auto Pneumatic Low Temperature Laminating Machine（air compressor not included） (120076)

Features
1: The film supporting rods are designed to effectively support both films with and without liner paper.
2: The film stripping rod is a large-diameter aluminum alloy rod, this design minimizes vibration and noise during operation.
3: Independent tensioning knobs allow for precise adjustment of the tension on all supporting rods, enabling real-time control over the film and improve the laminating effect.
4: The pneumatic lifting control handle enables manual adjustment of the rubber roller to move up and down.
5: The microcomputer control panel facilitates easy operation.
6: The pressure gauge can display the pressure in real time, the operator can observe and monitor the pressure change conveniently.
7: Four cutting devices can be installed on the supporting rod to efficiently remove white edges from prints and precisely cut them into sections as required.
8: Collecting rods simplify the collection of finished products and back paper, saving time and effort.

ProductSiteLaunchDate : 2018-09-28T01:30:53.075Z
Size : 2 Rolls
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 2
UnspscCode : 44102000
WarmUpTimeDescription : 5 minute