Cart 2 india

Specification
Brand : HARFINGTON
BulletPoint1 : Size - Draw Stud Thread Specifications: M20, Total Length: 97mm / 3.82", Lock Cap Diameter: 41mm / 1.6", Lock Cap High: 22mm / 0.9", Lock Cap Thread Specification: M20.
BulletPoint2 : Material - The hydraulic drive draw stud is made of chromium steel with heat treatment, ensuring high hardness, wear-resistant, corrosion-resistant and rust-proof.
BulletPoint3 : Features - A unique punch profile helps split slug for easier removal, increasing work efficiency. Use the die together during operation.
BulletPoint4 : Applications - Draw stud is designed for use with the hydraulic knockout punches with the same thread configuration. The punches hole-making kit is perfect for drilling holes in a wide range of materials, such as stainless steel, iron, aluminum, etc.
BulletPoint5 : Notice - First, open an 11.5mm guide hole, screw in the draw stud in the hole opener, put down the lower die, iron plate, and upper die in sequence, and finally press and open the hole.
Color : Black
ExternallyAssignedProductIdentifier1 : 0732970864497
ExternallyAssignedProductIdentifier2 : 732970864497
IncludedComponents : pack
ItemName : HARFINGTON Knockout Punch Draw Stud M20 Thread Replacement Hydraulic Draw Stud with Lock Cap Punches Hole-Making Kit Available for Hydraulic Drivers
ItemPackageDimensions_Height : 2.17 inches
ItemPackageDimensions_Length : 5.91 inches
ItemPackageDimensions_Width : 3.54 inches
ItemPackageQuantity : 1
ItemTypeKeyword : hand-tool-knockout-punches
Manufacturer : HARFINGTON
Material : Stainless Steel
Material1 : Stainless Steel
Material2 : Iron
Material3 : Alloy Steel
ModelName : Exact 1" Die
ModelNumber : hta240128hh000809
NumberOfItems : 1
OperationMode : Hydraulic
PartNumber : hta240128hh000809
PowerSourceType : Battery Powered
ProductDescription : The hydraulic drive draw stud is made of chromium steel with heat treatment, ensuring high hardness, wear-resistant, corrosion-resistant and rust-proof.
A unique punch profile helps split slug for easier removal, increasing work efficiency. Use the die together during operation.
First, open an 11.5mm guide hole, screw in the draw stud in the hole opener, put down the lower die, iron plate, and upper die in sequence, and finally press and open the hole.
It can only be used on metal plates below 4mm; please do not use it without load to avoid high pressure oil pipes bursting due to excessive pressure.
Draw stud is designed for use with the hydraulic knockout punches with the same thread configuration. The punches hole-making kit is perfect for drilling holes in a wide range of materials, such as stainless steel, iron, aluminum, etc.

ProductSiteLaunchDate : 2024-03-12T09:45:36.348Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 44101602