Cart 2 india

Specification
Brand : Amana Tool
BulletPoint1 : Diameter (D) 1-7/8
BulletPoint2 : Cutting height (B) 1/8
BulletPoint3 : Shank (D) 1/4
BulletPoint4 : Overall length (L) 2-3/8
BulletPoint5 : C 1/2
BulletPoint6 : 1 in. cutting depth
BulletPoint7 : For use on 4245 Steel Hawg
Color : Red / Silver
CutType1 : Carbide-Tipped Cut
CutType2 : Glue Joint Cut
ExternallyAssignedProductIdentifier1 : 738685933060
ExternallyAssignedProductIdentifier2 : 0738685933060
ExternallyAssignedProductIdentifier3 : 00738685933060
GpsrSafetyAttestation : 1
IncludedComponents : 1 Amana Branded Tool
ItemDisplayDimensions_Height : 4 inches
ItemDisplayDimensions_Length : 2 inches
ItemDisplayDimensions_Width : 2 inches
ItemDisplayWeight : 0.32 pounds
ItemName : Amana Tool - 53306 Slotting Cutter Assembly 2 Wing x 1-7/8 Dia x 1/8 x 1/4" Shank
ItemPackageDimensions_Height : 14.8 centimeters
ItemPackageDimensions_Length : 1 centimeters
ItemPackageDimensions_Width : 7.3 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : joinery-router-bits
Manufacturer : Amana Tool
Material : Steel
MeasurementSystem : Imperial
ModelName : 270-14
ModelNumber : 53306
NumberOfBoxes : 1
NumberOfFlutes : 2
NumberOfItems : 1
PackageLevel : unit
PartNumber : 53306
PowerSourceType : Corded Electric
ProductDescription : Adjusting the bit according to the thickness of the wood, line up the cut edge of the wood to the center point of the bit. Make the 1st cut face up, then turn the wood upside down to make the reverse matching cut. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is also equipped with wide open gullets for easy disposal of wood chips. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Note : In order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Excessive overall length may cause tool damage. In case a bit doesn't come with a speed chart. You may try the following suggestion. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness: Run 24,000 rpm maximum for 1" overall diameter router bits; Run 18,000 rpm maximum for 1-1/4" overall diameter router bits; Run 16,000 rpm maximum for 2-1/4" to 2-1/2" overall diameter router bits; Run 12,000 rpm maximum for 3" to 3-1/2" overall diameter router bits;
ProductSiteLaunchDate : 2007-04-03T00:00:00-00:00
Size : 1-7/8 Dia x 1/8 x 1/4" Shank
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27110000