Specification Brand : Intona BulletPoint : 2810913 MCR-C-UI-UI-DCI For Phoenix Original Isolation Amplifier BulletPoint1 : No external power supply required. External power can be connected to supply up to 2000mA BulletPoint2 : Galvanic isolation to the USB bus, supports SuperSpeed 5Gbps, hi-speed 480Mbps, full speed 12Mbps and Low speed 12Mbps BulletPoint3 : 1kVrms signal and power isolation, Advanced ESD protection (20kV) BulletPoint4 : Ultra-quiet power rail isolation for less noise in highly sensitive applications (< 1 µV RMS @ 22 kHz BW) BulletPoint5 : Works out of the box, no drivers needed Color : One Color Color1 : Grey Color2 : Black CompatibleDevices : Laptop CurrentRating : 8 amps DataTransferRate1 : 480 megabits_per_second DataTransferRate2 : 5 gigabits_per_second ExternallyAssignedProductIdentifier : 4260461650145 HardwareInterface1 : usb3.0 HardwareInterface2 : usb IncludedComponents : ACPL-782T-500E ItemName : Intona 7055-C USB 3.0 SuperSpeed Isolator, 1kVrms, 20kV ESD Protection. Supports Full Speed 12Mbps,High Speed (hi-Speed) 480Mbps and SuperSpeed 5Gbps ItemPackageDimensions_Height : 1 centimeters ItemPackageDimensions_Length : 3 centimeters ItemPackageDimensions_Width : 2 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : isolation-amplifiers Manufacturer : Intona Material : copper MaximumSwitchingCurrent : 8 amps MaximumSwitchingVoltage : 24 volts MeasurementSystem : Imperial ModelName : VPLEWIMR ModelNumber : VPLEWIMR MountingType : Surface Mount NumberOfItems : 1 OperationMode : Automatic PartNumber : 7055-C ProductDescription : Leading innovation: Intona has invented USB 2.0 Hi-Speed galvanic isolation. Previous isolators were limited to Full Speed (12 MBit/s) and Low Speed (1.5 MBit/s) transmission. This new product is capable of transmitting USB Hi-Speed (480 MBit/s) while providing full galvanic isolation of both the data and the power lines. USB 2.0 Hi-Speed Isolator withstands 5kVRMS (Extended Isolation) This product is an ideal solution to break ground loops, avoid noise coupling and protect ports from power surges and voltage spikes in applications which require high speed USB transfers. The galvanic isolation barrier withstands potential difference of 5,000VRMS. Provides galvanic isolation to the USB bus Compliant to USB 2.0 Hi-Speed (480 MBit/s) Backwards compatible to Full Speed and Low Speed Isolation withstands 5kVRMS Advanced ESD protection (20kV) Works out of the box, no drivers needed Transparent to host and device: wide compatibility to all operating systems, embedded systems and devices Works also with hubs and extenders Supports all USB-specific transfers and modes No additional round-trip latency Powered by USB bus, no separate power supply Ultra-quiet power rail isolation, linear regulation (LT3045) 500mA (internal DC/DC) or 2000mA (aux supply) output current on isolated side Status LED showing bus state and speed Impedance controlled high-speed circuit design National compliances: FCC, CE, RCM, ICES-003 IP 54 Aluminum housing Dimensions: 120 x 30 x 70 mm Engineered and manufactured in Germany ProductSiteLaunchDate : 2020-06-10T04:19:57.518Z Size : One Size SpecificationMet : Ma SupplierDeclaredDgHzRegulation : not_applicable SupplierDeclaredHasProductIdentifierExemption : 1 SupportedDevicesQuantity : 1 UnitCount : 1