Atlas Scientific Surveyor™ Analog Isolator

Imported from USA | Ships in 10 working days

5% instant discount on non COD

1

₹ 8900/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
Brand : Atlas Scientific Environmental Robotics
BulletPoint : 2810913 MCR-C-UI-UI-DCI For Phoenix Original Isolation Amplifier
BulletPoint1 : Data output: 10.6 KHz PWM, 0-3 Volts
BulletPoint2 : Voltage input: 3.0V − 5.0V
BulletPoint3 : Connector: Header pins
BulletPoint4 : Current consumption: 5V – 23 mA, 3.3V – 15.7 mS
BulletPoint5 : Weight: 13 grams
Color : One Color
Color1 : Grey
Color2 : Black
CompatibleDevices : Laptop
CurrentRating : 8 amps
DataTransferRate1 : 480 megabits_per_second
DataTransferRate2 : 5 gigabits_per_second
ExternallyAssignedProductIdentifier : 00857026007915
HardwareInterface1 : usb3.0
HardwareInterface2 : usb
IncludedComponents : ACPL-782T-500E
ItemName : Atlas Scientific Surveyor™ Analog Isolator
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : isolation-amplifiers
Manufacturer : Atlas Scientific
Material : copper
MaximumSwitchingCurrent : 8 amps
MaximumSwitchingVoltage : 24 volts
MeasurementSystem : Imperial
ModelName : VPLEWIMR
ModelNumber : VPLEWIMR
MountingType : Surface Mount
NumberOfItems : 1
OperationMode : Automatic
PartNumber : GRV-ISO
ProductDescription : The Surveyor Analog Isolator is designed to work exclusively with our Surveyor line of low-cost embedded meters. These isolators remove all electrical interference coming from other probes or pumps in the same water you are testing. It converts the analog output from a Surveyor pH, Surveyor ORP, or Surveyor D.O. meter to both, a PWM and a voltage signal. The PWM signal can then be easily converted back to a noise-free reading. Because this isolator uses PWM, it can be connected to a micro-controller that does not have an ADC. The voltage signal converts the sensor value into 0 – 3 Volts, good for a micro-controller that does have an ADC *A Raspberry Pi cannot accurately read PWM or analog voltage without a 3rd party hat.
ProductSiteLaunchDate : 2020-10-26T16:05:55.444Z
Size : One Size
SpecificationMet : Ma
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SupportedDevicesQuantity : 1
UnitCount : 1

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
0
4*
0
3*
0
2*
0
1*
0

No reviews found.

Have an opinion on this page? Let's hear it.