Specification Brand : JAIN Irrigation BulletPoint1 : 100ft roll 1/4" 0.17" ID BulletPoint2 : 30ft Max Run Length, 60ft if run in loop (fed from both ends) BulletPoint3 : 12" Dripper Spacing BulletPoint4 : 5-25PSI Operating Pressure BulletPoint5 : 1/2GPH Emitter Flow Rate BulletPoint6 : Product 2: Tubing outside diameter (OD) is 0.250 in., internal diameter (ID) is 0.170. in.; connect to main supply line with ¼ in. micro fitting such as a barbed connector, connect other end directly to emitter to deliver water to plant BulletPoint7 : Product 2: As part of a complete drip irrigation system, the supply tubing transports water to the area to be irrigated; Tubing coil comes shrink wrapped for convenience; easy to access as needed BulletPoint8 : Product 2: Poly tubing is constructed using a layering method for durability: the outer layer, which is exposed to the sun, and the inner layer, which is exposed to water, is made of 100% virgin content; the middle layer is composed of recycled content Color : Black ExternallyAssignedProductIdentifier1 : 0840041532852 ExternallyAssignedProductIdentifier2 : 840041532852 GpsrSafetyAttestation : 1 ItemLength : 750 feet ItemName : Drip Irrigation 1/4" Dripline 100 Ft. 12 Inch Spacing ItemPackageDimensions_Height : 15.8 centimeters ItemPackageDimensions_Length : 6 centimeters ItemPackageDimensions_Width : 15.1 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : automatic-lawn-irrigation-tubing Manufacturer : Jain Material : Polyurethane (PU) Material1 : Plastic Material2 : Polyvinyl Chloride (PVC) MaximumPressure : 25 pounds_per_square_inch ModelNumber : Hztyyier7tfpvhaggy-02 NominalWallThickness : 0.25 inch PartNumber : Hztyyier7tfpvhaggy-02 ProductDescription : 1/4" dripline with 1/2 GPH emitters spaced every 12". Use this tubing to wet large areas, containers and nursery pots, raised garden beds, vegetables and landscape flower beds. Can be wound through flower beds or borders, around trees or shrubs, run down rows or raised vegetable beds and can be used in container planting. This dripline also works well with some gravity and low pressure systems as long as the water is clean and filtered and a minimum of 5 PSI can be achieved. This commercial grade poly drip line is made of the highest quality resins and is resistant to UV rays. Use with 1/4" barbed fittings. You can terminate dripline with a goof plug or dripper. You attach the dripline to 1/2" tubing by using a 1/4" barbed connector, tee or elbow. Operating pressure: 5-25 PSI. Maximum line length: 30 ft. (60ft if fed in loop) Sold in 100' rolls. ProductSiteLaunchDate : 2010-01-26T19:20:42.000-00:00 Style : Hose + Tubing 250' Roll SupplierDeclaredDgHzRegulation : other UnitCount : 1 UnspscCode : 40142000