Specification Brand : Laser BulletPoint : Made in Japan BulletPoint1 : Supplied with safety stand; 1m USB cable to Micro USB cable and LED light BulletPoint2 : 12 Watt; charging time 3.5 hours; run time approx 90 minutes BulletPoint3 : Maximum temperature 932°f BulletPoint4 : Reaches working temperature 356°F in 10 seconds; charging protection BulletPoint5 : run time approx 90 minutes;Maximum temperature 932°f;Reaches working temperature 356°F in 10 seconds; charging protection;0 ExternallyAssignedProductIdentifier : 4962772459799 ExternallyAssignedProductIdentifier1 : 5018341073367 ExternallyAssignedProductIdentifier2 : 05018341073367 ExternallyAssignedProductIdentifier3 : 0760970447860 ExternallyAssignedProductIdentifier4 : 0760970447266 Hazmat1 : LITHIUM ION BATTERIES PACKED WITH EQUIPMENT Hazmat10 : CN_SmallLithiumIonBatteryWithEquipment Hazmat11 : DE_SmallLithiumIonBatteryWithEquipment Hazmat12 : EG_SmallLithiumIonBatteryWithEquipment Hazmat13 : ES_SmallLithiumIonBatteryWithEquipment Hazmat14 : FR_SmallLithiumIonBatteryWithEquipment Hazmat15 : GB_SmallLithiumIonBatteryWithEquipment Hazmat16 : IN_SmallLithiumIonBatteryWithEquipment Hazmat17 : IT_SmallLithiumIonBatteryWithEquipment Hazmat18 : JP_SmallLithiumIonBatteryWithEquipment Hazmat19 : MX_SmallLithiumIonBatteryWithEquipment Hazmat2 : UN3481 Hazmat20 : NL_SmallLithiumIonBatteryWithEquipment Hazmat21 : PL_SmallLithiumIonBatteryWithEquipment Hazmat22 : SA_SmallLithiumIonBatteryWithEquipment Hazmat23 : SE_SmallLithiumIonBatteryWithEquipment Hazmat24 : SG_SmallLithiumIonBatteryWithEquipment Hazmat25 : TR_SmallLithiumIonBatteryWithEquipment Hazmat26 : US_SmallLithiumIonBatteryWithEquipment Hazmat3 : II Hazmat4 : 9 Hazmat5 : AE_SmallLithiumIonBatteryWithEquipment Hazmat6 : AU_SmallLithiumIonBatteryWithEquipment Hazmat7 : BE_SmallLithiumIonBatteryWithEquipment Hazmat8 : BR_SmallLithiumIonBatteryWithEquipment Hazmat9 : CA_SmallLithiumIonBatteryWithEquipment HeatingElementType : Ceramic IncludedComponents : Soldering Iron Tips ItemLength : 3 inches ItemName : Laser 7336 Soldering Iron-Rechargeable 12w ItemPackageDimensions_Height : 22.4 centimeters ItemPackageDimensions_Length : 8.4 centimeters ItemPackageDimensions_Width : 16 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : soldering-irons Manufacturer : Laser Tools Material : iron ModelNumber : 7336 PartNumber : 7336 PowerSourceType : Battery Powered ProductDescription : How to solder: 1. The first time to use iron, it will come out from the tip of smoke. The smoke will disappear in a short time, the smoke will never appear again. 2. Prepare solder and soldering iron. In particular, the tip must be kept clean, where the solder should be coated. 3. When soldering, when the tip is covered with oxide and black, you need to rub in the rosin rub, and use solder wire to it on the tin, to keep the tip of the tip of the 1 / 4--1 / 2 area is Bright on tin state. 4. Use soldering iron to heat the welding parts, such as PCB wires and pads, and keep the iron evenly heated. 5. When the temperature is high enough, place the wire at the joint and the solder will melt and flow freely. 6. Do not pull out the tip and use it in this way, which will shorten the service life of the heating element. 7. During soldering iron is connected to power, it should be placed on the electric iron frame, do not mess up, so as to avoid accidents. After turning off power, it should be fully cooled after around 20 minutes.
The kit includes: 1x30W external electric soldering iron 5x spare soldering tips 1x12 grams (0.42 ounces) of solder wire 1x 12 grams (0.42 ounces) rosin 1x1.5 m (59 inch) suction tin copper wire 1x stainless steel tweezers 1x Simple stainless steel electric iron stand 1x High temperature sponge 1x Desoldering Pump 1x Wishful pliers 1x small brush 1x Packaging cartons
30W electric iron technical parameters Operating voltage 110V / 60HZ Power: 30W In normal operation, the tip temperature of the 30W soldering iron tip can reach 380 ° C (716 ° F)